If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
I have just discovered something that makes me think my problem is not
in the KDS monitor. I have two other machines, on with WXP, the other with W98SE. Both machines show a FULL SCREEN display on this same KDS VS-195E monitor. Therefore my problem is unique to my new ECS L7VMM3 (MOBO) Athlon-Duron machine which has W98SE on it. So, what setting (BIOS or otherwise) should I look for to fix my problem? Thanks, and please be nice. |
#2
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
|
#3
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
You still need to adjust the monitor using the buttons on the monitor cabinet, when
that computer is connected. Every computer will display differently on a monitor. -- Glen Ventura, MS MVP W95/98 Systems http://dts-l.org/goodpost.htm wrote in message ... I have just discovered something that makes me think my problem is not in the KDS monitor. I have two other machines, on with WXP, the other with W98SE. Both machines show a FULL SCREEN display on this same KDS VS-195E monitor. Therefore my problem is unique to my new ECS L7VMM3 (MOBO) Athlon-Duron machine which has W98SE on it. So, what setting (BIOS or otherwise) should I look for to fix my problem? Thanks, and please be nice. |
#4
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
wrote in message ... I have just discovered something that makes me think my problem is not in the KDS monitor. The control on the front... Pushing the left side should degauss the screen (makes the whole thing shake). Pushing the right side should give you a menu to make adjustments. If these aren't working then your monitor is broken and any adjustments you want to make will have to be done in the Display Properties in Windows. There is nothing you can do outside of Windows to make adjustments except fix/replace the monitor. Most monitors are designed to have a 1/4" dark gap at the sides of the monitors anyhow. |
#5
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
On Wed, 09 Jun 2004 12:39:22 GMT, "Noozer"
wrote: The control on the front... Pushing the left side should degauss the screen (makes the whole thing shake). Pushing the right side should give you a menu to make adjustments. If these aren't working then your monitor is broken and any adjustments you want to make will have to be done in the Display Properties in Windows. There is nothing you can do outside of Windows to make adjustments except fix/replace the monitor. Most monitors are designed to have a 1/4" dark gap at the sides of the monitors anyhow. Well I agree that the monitor must be broken - at least the control knob part. The 1/4" is really about 1/2", now that I look a little closer. Thanks for info on Monitor control. WeeW |
#6
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
It sounds like your video card may be failing.
-- DaveW wrote in message ... I have just discovered something that makes me think my problem is not in the KDS monitor. I have two other machines, on with WXP, the other with W98SE. Both machines show a FULL SCREEN display on this same KDS VS-195E monitor. Therefore my problem is unique to my new ECS L7VMM3 (MOBO) Athlon-Duron machine which has W98SE on it. So, what setting (BIOS or otherwise) should I look for to fix my problem? Thanks, and please be nice. |
#7
|
|||
|
|||
Still Need Help - Display screen size suddenly shrunk a little
I had a HP comp running win98se that I had downloaded updated video drivers
for. The screen then left a three inch 'frame' of black all around. I got into the advanced display properties and it said that my CRT monitor was an LCD monitor. After I changed that everything was fine. Hope it helps. ~Patty wrote in message ... I have just discovered something that makes me think my problem is not in the KDS monitor. I have two other machines, on with WXP, the other with W98SE. Both machines show a FULL SCREEN display on this same KDS VS-195E monitor. Therefore my problem is unique to my new ECS L7VMM3 (MOBO) Athlon-Duron machine which has W98SE on it. So, what setting (BIOS or otherwise) should I look for to fix my problem? Thanks, and please be nice. -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DOCUMENT VIEWING SCREEN HAS SHRUNK | VICKI | Monitors & Displays | 3 | July 16th 04 06:42 AM |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |
Win98SE - problem with USB printer | HBYardSale | Software & Applications | 2 | June 20th 04 06:27 PM |
Help - Display screen size suddenly shrunk a little | [email protected] | Improving Performance | 1 | June 8th 04 06:50 PM |
Display too large for monitor screen | David | Monitors & Displays | 5 | June 4th 04 02:13 PM |