If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ME System Restore Files
To date my wife has accumulated 26,598, (twenty six
thousand five hundred and ninety eight) of these files, taking upwards of 7,018,380 K of her hard drive. As a consequence any thorough searches, anti virus scans or hard drive defrags take a considerable time to execute. Really not acceptable, in these high tech days, hey? Is there some acceptable way to reduce the volume and quantity to a more manageable figure, thats apart from copying them across to about 10 -14 data CD's. At present I'm trending towards splitting all but the last 100 together with their control BKUPVXDLASTLOG.## into another directory, that is after creating a restore position, and then see what happens. Then if nothing untoward or disastrous happens, delete about 26,498 of the little buggers.!! Has anyone any alternative or more politically correct solution? |
#2
|
|||
|
|||
ME System Restore Files
Terry -
Manually removing ANY files from the _Restore archive WILL break System Restore - unless you get very lucky. From the sound of it, you may already have attempted something similar, as there's no way that the archive should contain that many files. First - try reducing the space allocation for SR from System Properties|Performance|File System - most people can operate happily with SR allocations of 200-400MB. Reboot, and check the folder again. Then Test SR function by creating a manual restore point - does that work OK?? Look here for a test for the full functioning of SR http://www.btinternet.com/~winnoel/quiktipsr.htm post back with any error messages, etc. If that all works OK, then you should be down to a reasonable number of files - if not the you may have to reset System Restore To Reset System Restore - System | Performance | File System | Troubleshooting and check "Disable System Restore", Apply and IMMEDIATELY reboot. This will flush you restore folder and erase all checkpoints, then, System | Performance | File System | Troubleshooting and uncheck "Disable System Restore", Apply and again IMMEDIATELY reboot. This should now automatically create a new checkpoint immediately following the restart. Finally adjust the space allocated to the restore folder, System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "Terry" wrote in message ... To date my wife has accumulated 26,598, (twenty six thousand five hundred and ninety eight) of these files, taking upwards of 7,018,380 K of her hard drive. As a consequence any thorough searches, anti virus scans or hard drive defrags take a considerable time to execute. Really not acceptable, in these high tech days, hey? Is there some acceptable way to reduce the volume and quantity to a more manageable figure, thats apart from copying them across to about 10 -14 data CD's. At present I'm trending towards splitting all but the last 100 together with their control BKUPVXDLASTLOG.## into another directory, that is after creating a restore position, and then see what happens. Then if nothing untoward or disastrous happens, delete about 26,498 of the little buggers.!! Has anyone any alternative or more politically correct solution? |
#3
|
|||
|
|||
ME System Restore Files
Thanks Noel,
You could be right you know, as the restore files start at 32,000 odd, must have happened long ago though, as I can't remember doing same. Certainly sounds like something I would do in my adventuruous days. Will try your suggestion and let you know. Best time to do it is while it is running without problems. Thanks CYL "Noel Paton" wrote in message ... Terry - Manually removing ANY files from the _Restore archive WILL break System Restore - unless you get very lucky. From the sound of it, you may already have attempted something similar, as there's no way that the archive should contain that many files. First - try reducing the space allocation for SR from System Properties|Performance|File System - most people can operate happily with SR allocations of 200-400MB. Reboot, and check the folder again. Then Test SR function by creating a manual restore point - does that work OK?? Look here for a test for the full functioning of SR http://www.btinternet.com/~winnoel/quiktipsr.htm post back with any error messages, etc. If that all works OK, then you should be down to a reasonable number of files - if not the you may have to reset System Restore To Reset System Restore - System | Performance | File System | Troubleshooting and check "Disable System Restore", Apply and IMMEDIATELY reboot. This will flush you restore folder and erase all checkpoints, then, System | Performance | File System | Troubleshooting and uncheck "Disable System Restore", Apply and again IMMEDIATELY reboot. This should now automatically create a new checkpoint immediately following the restart. Finally adjust the space allocated to the restore folder, System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "Terry" wrote in message ... To date my wife has accumulated 26,598, (twenty six thousand five hundred and ninety eight) of these files, taking upwards of 7,018,380 K of her hard drive. As a consequence any thorough searches, anti virus scans or hard drive defrags take a considerable time to execute. Really not acceptable, in these high tech days, hey? Is there some acceptable way to reduce the volume and quantity to a more manageable figure, thats apart from copying them across to about 10 -14 data CD's. At present I'm trending towards splitting all but the last 100 together with their control BKUPVXDLASTLOG.## into another directory, that is after creating a restore position, and then see what happens. Then if nothing untoward or disastrous happens, delete about 26,498 of the little buggers.!! Has anyone any alternative or more politically correct solution? |
#4
|
|||
|
|||
ME System Restore Files
Noel
Your advice worked admirably, thank you. Followed your procedure as outlined to the letter, with the main recovery point occuring following the reboot after re-enabling "System Restore". Prior to the shutdown for reboot in the normal cycle of things, there was a major delay while the system sorted itself out, deleting the surplus "System Restore " data, resetting the logs and generally having a Bex and a "good lie down", as far as I can recall I had to click on the "wait for the activity to finalise" button at least three and maybe four times, recalling that it had 7 + gb to get rid of by deletion from the hard drive. I would say that though one may have been tempted to click on shutdown button, to do so at that stage would have been tempting disaster. When I went back to adjust the restore reserve value, the slider was hanging out at max 23 gb +, so I returned it to the minimum setting, Ok'd and applied out, rebooted , went back in and reset to around 250 mb. Mission accomplished after a full Norton System works Diagnosis, ScanDisk, Defrag and scanregw /fix. I did have a look at and printed off your URL reference, but held that back for reference if further recovery attempts were needed. They were not. Thanks once again Noel. Now I can get back to my normal stuff. Terry "Noel Paton" wrote in message ... Terry - Manually removing ANY files from the _Restore archive WILL break System Restore - unless you get very lucky. From the sound of it, you may already have attempted something similar, as there's no way that the archive should contain that many files. First - try reducing the space allocation for SR from System Properties|Performance|File System - most people can operate happily with SR allocations of 200-400MB. Reboot, and check the folder again. Then Test SR function by creating a manual restore point - does that work OK?? Look here for a test for the full functioning of SR http://www.btinternet.com/~winnoel/quiktipsr.htm post back with any error messages, etc. If that all works OK, then you should be down to a reasonable number of files - if not the you may have to reset System Restore To Reset System Restore - System | Performance | File System | Troubleshooting and check "Disable System Restore", Apply and IMMEDIATELY reboot. This will flush you restore folder and erase all checkpoints, then, System | Performance | File System | Troubleshooting and uncheck "Disable System Restore", Apply and again IMMEDIATELY reboot. This should now automatically create a new checkpoint immediately following the restart. Finally adjust the space allocated to the restore folder, System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "Terry" wrote in message ... To date my wife has accumulated 26,598, (twenty six thousand five hundred and ninety eight) of these files, taking upwards of 7,018,380 K of her hard drive. As a consequence any thorough searches, anti virus scans or hard drive defrags take a considerable time to execute. Really not acceptable, in these high tech days, hey? Is there some acceptable way to reduce the volume and quantity to a more manageable figure, thats apart from copying them across to about 10 -14 data CD's. At present I'm trending towards splitting all but the last 100 together with their control BKUPVXDLASTLOG.## into another directory, that is after creating a restore position, and then see what happens. Then if nothing untoward or disastrous happens, delete about 26,498 of the little buggers.!! Has anyone any alternative or more politically correct solution? |
#5
|
|||
|
|||
ME System Restore Files
Thanks for the feedback - and well done (patience is a virtue - as you've
discoveredg) Good Luck -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "tmno2" wrote in message ... Noel Your advice worked admirably, thank you. Followed your procedure as outlined to the letter, with the main recovery point occuring following the reboot after re-enabling "System Restore". Prior to the shutdown for reboot in the normal cycle of things, there was a major delay while the system sorted itself out, deleting the surplus "System Restore " data, resetting the logs and generally having a Bex and a "good lie down", as far as I can recall I had to click on the "wait for the activity to finalise" button at least three and maybe four times, recalling that it had 7 + gb to get rid of by deletion from the hard drive. I would say that though one may have been tempted to click on shutdown button, to do so at that stage would have been tempting disaster. When I went back to adjust the restore reserve value, the slider was hanging out at max 23 gb +, so I returned it to the minimum setting, Ok'd and applied out, rebooted , went back in and reset to around 250 mb. Mission accomplished after a full Norton System works Diagnosis, ScanDisk, Defrag and scanregw /fix. I did have a look at and printed off your URL reference, but held that back for reference if further recovery attempts were needed. They were not. Thanks once again Noel. Now I can get back to my normal stuff. Terry "Noel Paton" wrote in message ... Terry - Manually removing ANY files from the _Restore archive WILL break System Restore - unless you get very lucky. From the sound of it, you may already have attempted something similar, as there's no way that the archive should contain that many files. First - try reducing the space allocation for SR from System Properties|Performance|File System - most people can operate happily with SR allocations of 200-400MB. Reboot, and check the folder again. Then Test SR function by creating a manual restore point - does that work OK?? Look here for a test for the full functioning of SR http://www.btinternet.com/~winnoel/quiktipsr.htm post back with any error messages, etc. If that all works OK, then you should be down to a reasonable number of files - if not the you may have to reset System Restore To Reset System Restore - System | Performance | File System | Troubleshooting and check "Disable System Restore", Apply and IMMEDIATELY reboot. This will flush you restore folder and erase all checkpoints, then, System | Performance | File System | Troubleshooting and uncheck "Disable System Restore", Apply and again IMMEDIATELY reboot. This should now automatically create a new checkpoint immediately following the restart. Finally adjust the space allocated to the restore folder, System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "Terry" wrote in message ... To date my wife has accumulated 26,598, (twenty six thousand five hundred and ninety eight) of these files, taking upwards of 7,018,380 K of her hard drive. As a consequence any thorough searches, anti virus scans or hard drive defrags take a considerable time to execute. Really not acceptable, in these high tech days, hey? Is there some acceptable way to reduce the volume and quantity to a more manageable figure, thats apart from copying them across to about 10 -14 data CD's. At present I'm trending towards splitting all but the last 100 together with their control BKUPVXDLASTLOG.## into another directory, that is after creating a restore position, and then see what happens. Then if nothing untoward or disastrous happens, delete about 26,498 of the little buggers.!! Has anyone any alternative or more politically correct solution? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |
Cannot ENABLE System Restore. Help! | aa | General | 0 | July 3rd 04 04:05 PM |
ME system restore tmp files | Matt | General | 2 | June 26th 04 05:23 PM |
"Restore/Temp......."Virus OEM Me | David Oltmann | General | 5 | June 8th 04 09:25 PM |
deleting virus files from System Restore - admin authority needed | Jim | General | 1 | May 27th 04 06:42 PM |