If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is this hard drive dying?
Neighbour complains that she can no longer load her Scrabble CD. I manage
to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#2
|
|||
|
|||
Is this hard drive dying?
Taking the second point first, try running Scandisk in Safe Mode as 'other
background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#3
|
|||
|
|||
Is this hard drive dying?
Hi Mart,
Scandisk ran with no problems in safe mode so that puts my worst fears to rest! Starting from the WinMe floppy went OK. The first result was CDR101 : Not ready reading drive E. Second CD actually read its contents OK. Put the first one in again an hey presto it showed its contents. Put in another CD and got the same error message again. Then at another try all was OK. I then restarted ME and tried the Scrabble CD again. It hung for a while with the activity light pulsing slowly. I was on the point of giving up when the CD drive sprang to life and the game loaded. So does this mean the CD drive is on the Blink, literally, or is there any further treatment I can give it ? Thanks very much for your spot on diagnosis so far. Richard. .. "Mart" wrote in message ... Taking the second point first, try running Scandisk in Safe Mode as 'other background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#4
|
|||
|
|||
Is this hard drive dying?
OK Richard, two things you can try with your CD-ROM (although my *guess* is
that it probably is failing especially if it's more than just a few years old!) is to run a (commercial) CD lens cleaner in your CD-ROM. This is normally available from your local record shop (Tesco?) and should only cost a couple of quid or so. Secondly, remove the side-cover from your pc and confirm that the cables are firmly seated in their sockets at the back of the CD-ROM - AND on the motherboard! - They *may* have vibrated loose. Failing that, a new CD-ROM - or better still a CD-RW, to allow you to burn your own CD's - is probably the best solution. Again, replacement CD-ROM's are quite cheap and CD-RW's are not very much dearer. No particular recommendations for brands - all probably made at the same factory in Taiwan (or China), just different badges. Scan the shelves at Tesco - or Google g Mart "Hawkins" wrote in message ... Hi Mart, Scandisk ran with no problems in safe mode so that puts my worst fears to rest! Starting from the WinMe floppy went OK. The first result was CDR101 : Not ready reading drive E. Second CD actually read its contents OK. Put the first one in again an hey presto it showed its contents. Put in another CD and got the same error message again. Then at another try all was OK. I then restarted ME and tried the Scrabble CD again. It hung for a while with the activity light pulsing slowly. I was on the point of giving up when the CD drive sprang to life and the game loaded. So does this mean the CD drive is on the Blink, literally, or is there any further treatment I can give it ? Thanks very much for your spot on diagnosis so far. Richard. . "Mart" wrote in message ... Taking the second point first, try running Scandisk in Safe Mode as 'other background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#5
|
|||
|
|||
Is this hard drive dying?
Mart,
Many thanks I will try a cleaning gadget first and then the replacement drive if all the connections are sound. Richard. .. "Mart" wrote in message ... OK Richard, two things you can try with your CD-ROM (although my *guess* is that it probably is failing especially if it's more than just a few years old!) is to run a (commercial) CD lens cleaner in your CD-ROM. This is normally available from your local record shop (Tesco?) and should only cost a couple of quid or so. Secondly, remove the side-cover from your pc and confirm that the cables are firmly seated in their sockets at the back of the CD-ROM - AND on the motherboard! - They *may* have vibrated loose. Failing that, a new CD-ROM - or better still a CD-RW, to allow you to burn your own CD's - is probably the best solution. Again, replacement CD-ROM's are quite cheap and CD-RW's are not very much dearer. No particular recommendations for brands - all probably made at the same factory in Taiwan (or China), just different badges. Scan the shelves at Tesco - or Google g Mart "Hawkins" wrote in message ... Hi Mart, Scandisk ran with no problems in safe mode so that puts my worst fears to rest! Starting from the WinMe floppy went OK. The first result was CDR101 : Not ready reading drive E. Second CD actually read its contents OK. Put the first one in again an hey presto it showed its contents. Put in another CD and got the same error message again. Then at another try all was OK. I then restarted ME and tried the Scrabble CD again. It hung for a while with the activity light pulsing slowly. I was on the point of giving up when the CD drive sprang to life and the game loaded. So does this mean the CD drive is on the Blink, literally, or is there any further treatment I can give it ? Thanks very much for your spot on diagnosis so far. Richard. . "Mart" wrote in message ... Taking the second point first, try running Scandisk in Safe Mode as 'other background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#6
|
|||
|
|||
Is this hard drive dying?
Just to let you know the final outcome.
A lens cleaner did not fix things but it is a useful thing to have in stock. I had saved a DVD/CD drive from another computer and this has replaced the suspect drive. I now have a very happy neighbour who can not only get back to her favourite Scrabble game but she can Boogie on down to the latest Pop videos, well why not she is only about 76 years young !! Thanks again Richard. .. "Mart" wrote in message ... OK Richard, two things you can try with your CD-ROM (although my *guess* is that it probably is failing especially if it's more than just a few years old!) is to run a (commercial) CD lens cleaner in your CD-ROM. This is normally available from your local record shop (Tesco?) and should only cost a couple of quid or so. Secondly, remove the side-cover from your pc and confirm that the cables are firmly seated in their sockets at the back of the CD-ROM - AND on the motherboard! - They *may* have vibrated loose. Failing that, a new CD-ROM - or better still a CD-RW, to allow you to burn your own CD's - is probably the best solution. Again, replacement CD-ROM's are quite cheap and CD-RW's are not very much dearer. No particular recommendations for brands - all probably made at the same factory in Taiwan (or China), just different badges. Scan the shelves at Tesco - or Google g Mart "Hawkins" wrote in message ... Hi Mart, Scandisk ran with no problems in safe mode so that puts my worst fears to rest! Starting from the WinMe floppy went OK. The first result was CDR101 : Not ready reading drive E. Second CD actually read its contents OK. Put the first one in again an hey presto it showed its contents. Put in another CD and got the same error message again. Then at another try all was OK. I then restarted ME and tried the Scrabble CD again. It hung for a while with the activity light pulsing slowly. I was on the point of giving up when the CD drive sprang to life and the game loaded. So does this mean the CD drive is on the Blink, literally, or is there any further treatment I can give it ? Thanks very much for your spot on diagnosis so far. Richard. . "Mart" wrote in message ... Taking the second point first, try running Scandisk in Safe Mode as 'other background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
#7
|
|||
|
|||
Is this hard drive dying?
You're welcome Richard and thanks for the feedback. I'm pleased that your
neighbour is now up and running (or dancing?) through her word game. Also, good to know that it's not just me who can't throw things away g Mart "Hawkins" wrote in message ... Just to let you know the final outcome. A lens cleaner did not fix things but it is a useful thing to have in stock. I had saved a DVD/CD drive from another computer and this has replaced the suspect drive. I now have a very happy neighbour who can not only get back to her favourite Scrabble game but she can Boogie on down to the latest Pop videos, well why not she is only about 76 years young !! Thanks again Richard. . "Mart" wrote in message ... OK Richard, two things you can try with your CD-ROM (although my *guess* is that it probably is failing especially if it's more than just a few years old!) is to run a (commercial) CD lens cleaner in your CD-ROM. This is normally available from your local record shop (Tesco?) and should only cost a couple of quid or so. Secondly, remove the side-cover from your pc and confirm that the cables are firmly seated in their sockets at the back of the CD-ROM - AND on the motherboard! - They *may* have vibrated loose. Failing that, a new CD-ROM - or better still a CD-RW, to allow you to burn your own CD's - is probably the best solution. Again, replacement CD-ROM's are quite cheap and CD-RW's are not very much dearer. No particular recommendations for brands - all probably made at the same factory in Taiwan (or China), just different badges. Scan the shelves at Tesco - or Google g Mart "Hawkins" wrote in message ... Hi Mart, Scandisk ran with no problems in safe mode so that puts my worst fears to rest! Starting from the WinMe floppy went OK. The first result was CDR101 : Not ready reading drive E. Second CD actually read its contents OK. Put the first one in again an hey presto it showed its contents. Put in another CD and got the same error message again. Then at another try all was OK. I then restarted ME and tried the Scrabble CD again. It hung for a while with the activity light pulsing slowly. I was on the point of giving up when the CD drive sprang to life and the game loaded. So does this mean the CD drive is on the Blink, literally, or is there any further treatment I can give it ? Thanks very much for your spot on diagnosis so far. Richard. . "Mart" wrote in message ... Taking the second point first, try running Scandisk in Safe Mode as 'other background running processes' can often cause Scandisk to recycle in Normal Mode. To boot into Safe Mode :- There is an 'Official' (documented) MS method for WinMe - as per a search for 'safe mode' in Help and Support Centre will find - by holding down or 'stabbing at' the Ctrl or the F8 keys as the pc boots from cold. A further couple of methods are by using the Shift key as above, or when your machine is running in Normal Mode, run msconfig.exe and on the General tab, select Advanced and check the 'Enable Startup Menu' box. (Not forgetting to disable it when you've finished g) Regarding the CD's being unable to be read issue - the CD-ROM *might* just be failing and *probably* unrelated to the Scandisk issue. You need to check-out the CD-ROM in Real Mode DOS. To 'see' it in Real Mode DOS, Boot, using your WinMe Startup (floppy) Disk in the A: drive. Select option 2. Start computer with CD-ROM support. Let the screen information scroll until you eventually see a line which should report a drive letter for the CD-ROM - but note that it may not necessarily the same letter as you would expect to see in Windows. For example, you may see the CD-ROM becoming the E: so the screen should show: Drive E:= Driver MSCD001 UNIT 0 Your CD-ROM Is Drive E When the boot disk finally settles down, you will be presented with an A:\ prompt. Now put a (data) CD into the CD-ROM and at the A:\ prompt, type "E:" (no quotes and note the colon after the letter E) Then Press Return. Now, at the E:\ prompt, type "DIR /P" (no quotes and note the space) Then press Return. You should see a listing of the CD contents. - Try several CD's Come back with your results. Give EXACT errors reports - if any. Mart "Hawkins" wrote in message ... Neighbour complains that she can no longer load her Scrabble CD. I manage to get it to start via the Run box but it will not start from its normal shortcut and other CDs cannot be read. I started to do some long overdue housekeeping and when I got Scandisk it would start, recycle many times but would not progress to the end. Is this a indicator that the hard drive is going south or should I do some other checks to be certain ? Richard |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
win 98 installation | rc | General | 21 | September 6th 06 09:04 PM |
Primary IDE Controller Error | Mathers | General | 51 | August 5th 06 12:22 AM |
Large Hard Drive on Promise Card Doesn't Work | Ken Dibble | General | 46 | December 31st 05 06:04 AM |
Cannot format a network drive | iwrpwrri | General | 21 | March 31st 05 02:41 PM |
Adding another HD - some questions | Bill in Co. | General | 88 | December 12th 04 08:22 PM |