![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
The condition may have begun over a week ago; I'm not sure. The small
hourglass figure alongside the mouse pointer easily goes unnoticed but if it's showing when I try to quit, the computer always hangs up. I don't know what turns it on. I have eliminated all except Explorer and System Tray but the hourglass still remains. If, at that point, I restart the computer the hourglass disappears and I can then shut down normally. Its presence seems to have no effect at all on other things I do until I try to quit. Please, where do I look now? Ken Bland |
#2
|
|||
|
|||
![]()
Get Process Explorer, free, from www.sysinternals.com . Along with showing
you every active process (to include background) and the amount of cpu cycles in %, used by each, it will also keep a short recording of running items and their usage. In the upper right of the PE GUI, you will see the graph (green line), if you hover your pointer over any 'spike' it will tell you what process made it. Might help you narrow down what it happening. Heirloom, old and due a process "Justin Thyme" wrote in message ... The condition may have begun over a week ago; I'm not sure. The small hourglass figure alongside the mouse pointer easily goes unnoticed but if it's showing when I try to quit, the computer always hangs up. I don't know what turns it on. I have eliminated all except Explorer and System Tray but the hourglass still remains. If, at that point, I restart the computer the hourglass disappears and I can then shut down normally. Its presence seems to have no effect at all on other things I do until I try to quit. Please, where do I look now? Ken Bland |
#3
|
|||
|
|||
![]()
Sorry for the delayed response, Heirloom; I hadn't forgotten but I wanted to
have a little more information for you before replying. I'm familiar with Process Explorer and , frankly, it tells me zip. If a heart monitor was as flat as this thin green line the patient would be cold stone dead. Typically System Idle is between 96-97%; True Vector, Zone Labs Client, and Spam Filter, all part of ZoneAlarm, comprise together about 2%; Sysinternals itself uses about 2%. If there are any smaller trace usages they don't show up. The only time a spike occurs is when I deliberately query one of the running processes and then only momentarily. Luke, if you're reading this, the programs typically running when I do a Ctrl-Alt-Delete are, in order: Mozilla Firefox (if I've opened Firefox); Explorer; Zlclient (part of ZoneAlarm); Mantispm (Matador, part of ZoneAlarm spamblocker); Vsmon (part of ZoneAlarm); Em_exec (part of Logitech); Systray; and Isafe (part of ZoneAlarm). For those time when I use Internet Explorer in lieu of Firefox I will see Cpal and Cpbrwtch (from Cookie Pal, a cookie screener app that I've used for years). That's it. The hourglass and mouse pointer aren't always associated together when I'm ready to shutdown, but perhaps 90% of the time. Ken Bland ============================================== "heirloom" wrote in message ... Get Process Explorer, free, from www.sysinternals.com . Along with showing you every active process (to include background) and the amount of cpu cycles in %, used by each, it will also keep a short recording of running items and their usage. In the upper right of the PE GUI, you will see the graph (green line), if you hover your pointer over any 'spike' it will tell you what process made it. Might help you narrow down what it happening. Heirloom, old and due a process |
#4
|
|||
|
|||
![]()
Ken wrote :-
.... True Vector, Zone Labs I've had quite a bit of trouble with this aspect of ZA on my XP box (long story). If possible, try 'uninstalling' ZA for a day or two and see if the problem goes with it. I've now given up with ZA (sadly) and rely on XP's Firewall - not an option in WinMe. Before you uninstall it, - at shutdown, when the hourglass is showing - look in Task Manager (Ctrl+Alt+Del) under Processes to see if there is more than one instance of Explorer.exe running. Mart "Justin Thyme" wrote in message ... Sorry for the delayed response, Heirloom; I hadn't forgotten but I wanted to have a little more information for you before replying. I'm familiar with Process Explorer and , frankly, it tells me zip. If a heart monitor was as flat as this thin green line the patient would be cold stone dead. Typically System Idle is between 96-97%; True Vector, Zone Labs Client, and Spam Filter, all part of ZoneAlarm, comprise together about 2%; Sysinternals itself uses about 2%. If there are any smaller trace usages they don't show up. The only time a spike occurs is when I deliberately query one of the running processes and then only momentarily. Luke, if you're reading this, the programs typically running when I do a Ctrl-Alt-Delete are, in order: Mozilla Firefox (if I've opened Firefox); Explorer; Zlclient (part of ZoneAlarm); Mantispm (Matador, part of ZoneAlarm spamblocker); Vsmon (part of ZoneAlarm); Em_exec (part of Logitech); Systray; and Isafe (part of ZoneAlarm). For those time when I use Internet Explorer in lieu of Firefox I will see Cpal and Cpbrwtch (from Cookie Pal, a cookie screener app that I've used for years). That's it. The hourglass and mouse pointer aren't always associated together when I'm ready to shutdown, but perhaps 90% of the time. Ken Bland ============================================== "heirloom" wrote in message ... Get Process Explorer, free, from www.sysinternals.com . Along with showing you every active process (to include background) and the amount of cpu cycles in %, used by each, it will also keep a short recording of running items and their usage. In the upper right of the PE GUI, you will see the graph (green line), if you hover your pointer over any 'spike' it will tell you what process made it. Might help you narrow down what it happening. Heirloom, old and due a process |
#5
|
|||
|
|||
![]()
Sorry that didn't help. Maybe something here will:
http://66.39.115.252/win4/a/shutdown.htm http://support.microsoft.com/?kbid=149962 http://support.microsoft.com/support/windows/tshoot/ I looked at your program list.....nothing really stood out as a source of problem. Wish I could be of more assistance.......please post your fix, I'm interested. Heirloom, old and had a nap, now time for bed "Justin Thyme" wrote in message ... Sorry for the delayed response, Heirloom; I hadn't forgotten but I wanted to have a little more information for you before replying. I'm familiar with Process Explorer and , frankly, it tells me zip. If a heart monitor was as flat as this thin green line the patient would be cold stone dead. Typically System Idle is between 96-97%; True Vector, Zone Labs Client, and Spam Filter, all part of ZoneAlarm, comprise together about 2%; Sysinternals itself uses about 2%. If there are any smaller trace usages they don't show up. The only time a spike occurs is when I deliberately query one of the running processes and then only momentarily. Luke, if you're reading this, the programs typically running when I do a Ctrl-Alt-Delete are, in order: Mozilla Firefox (if I've opened Firefox); Explorer; Zlclient (part of ZoneAlarm); Mantispm (Matador, part of ZoneAlarm spamblocker); Vsmon (part of ZoneAlarm); Em_exec (part of Logitech); Systray; and Isafe (part of ZoneAlarm). For those time when I use Internet Explorer in lieu of Firefox I will see Cpal and Cpbrwtch (from Cookie Pal, a cookie screener app that I've used for years). That's it. The hourglass and mouse pointer aren't always associated together when I'm ready to shutdown, but perhaps 90% of the time. Ken Bland ============================================== "heirloom" wrote in message ... Get Process Explorer, free, from www.sysinternals.com . Along with showing you every active process (to include background) and the amount of cpu cycles in %, used by each, it will also keep a short recording of running items and their usage. In the upper right of the PE GUI, you will see the graph (green line), if you hover your pointer over any 'spike' it will tell you what process made it. Might help you narrow down what it happening. Heirloom, old and due a process |
#6
|
|||
|
|||
![]()
Justin Thyme wrote:
snips the programs typically running when I do a Ctrl-Alt-Delete ummm.... Start/Shutdown too complicated ? Rick |
#7
|
|||
|
|||
![]()
I believe he was just using CAD to see what processes were active, but, ya
never know. Heirloom, old and everything is complicated "Rick T" wrote in message ... Justin Thyme wrote: snips the programs typically running when I do a Ctrl-Alt-Delete ummm.... Start/Shutdown too complicated ? Rick |
#8
|
|||
|
|||
![]() "Rick T" wrote in message ... Justin Thyme wrote: snips the programs typically running when I do a Ctrl-Alt-Delete ummm.... Start/Shutdown too complicated ? Rick Not at all, Rick, please go back and read my first entry in this series. If the mouse pointer is associated with the small hourglass Start/Shutdown doesn't work. Screen goes black, requiring a power off, and subsequent scan disk to start again. Ken Bland |
#9
|
|||
|
|||
![]()
heirloom wrote:
I believe he was just using CAD to see what processes were active, but, ya never know. oh yeah (duh) Rick Heirloom, old and everything is complicated "Rick T" wrote in message ... Justin Thyme wrote: snips the programs typically running when I do a Ctrl-Alt-Delete ummm.... Start/Shutdown too complicated ? Rick |
#10
|
|||
|
|||
![]()
If this is a consistent thing you can shutdown those processes in
TaskManager to see at what point the hourglass disappears. Rick Justin Thyme wrote: Sorry for the delayed response, Heirloom; I hadn't forgotten but I wanted to have a little more information for you before replying. I'm familiar with Process Explorer and , frankly, it tells me zip. If a heart monitor was as flat as this thin green line the patient would be cold stone dead. Typically System Idle is between 96-97%; True Vector, Zone Labs Client, and Spam Filter, all part of ZoneAlarm, comprise together about 2%; Sysinternals itself uses about 2%. If there are any smaller trace usages they don't show up. The only time a spike occurs is when I deliberately query one of the running processes and then only momentarily. Luke, if you're reading this, the programs typically running when I do a Ctrl-Alt-Delete are, in order: Mozilla Firefox (if I've opened Firefox); Explorer; Zlclient (part of ZoneAlarm); Mantispm (Matador, part of ZoneAlarm spamblocker); Vsmon (part of ZoneAlarm); Em_exec (part of Logitech); Systray; and Isafe (part of ZoneAlarm). For those time when I use Internet Explorer in lieu of Firefox I will see Cpal and Cpbrwtch (from Cookie Pal, a cookie screener app that I've used for years). That's it. The hourglass and mouse pointer aren't always associated together when I'm ready to shutdown, but perhaps 90% of the time. Ken Bland ============================================== "heirloom" wrote in message ... Get Process Explorer, free, from www.sysinternals.com . Along with showing you every active process (to include background) and the amount of cpu cycles in %, used by each, it will also keep a short recording of running items and their usage. In the upper right of the PE GUI, you will see the graph (green line), if you hover your pointer over any 'spike' it will tell you what process made it. Might help you narrow down what it happening. Heirloom, old and due a process |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
mouse pointer jumping | General | 0 | December 9th 04 07:13 PM | |
Mouse pointer drifting | Tritoneur | General | 1 | September 20th 04 08:16 AM |
Win98 SE does not recognize PS/2 mouse on cold boot, only warm | Iudith | General | 0 | June 16th 04 12:50 PM |
MS optical mouse not working in USB | Doug Boufford | Plug & Play | 2 | June 9th 04 10:10 AM |
need help installing a serial mouse | Jack Lee | General | 0 | June 5th 04 01:50 PM |