If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#71
|
|||
|
|||
Having strange local network printing problem - could use some
"Brian A." wrote: "normc" wrote in message ... Thanks Brian - Brian A. wrote: Thanks for that MEB, correct me if I misunderstood anything so I have it right. The OP has a printer connected to a 98SE machine as a local shared printer. Right The printer is shared with remote XP machines on the network. Probably doesn't matter, but one remote is XPSP2 and one is 98SE Sometimes the OS flavor can matter, however in this case it doesn't. The printer fails on the 98SE machine it's physically connected to after a shutdown/restart. Fails any time, i.e. will not print from base machine at any time. The printer still works on the remote machines after a shutdown/restart? Right. This doesn't make sense, hence the purpose of the question mark. Does it make more sense now? Only if the drivers are installed on the other two machines, if they aren't and the shared printer isn't working on the host machine they printer should fail on all machines. With regard to your suggestion about reinstalling the printer, I'm a great believer in, "if it ain't broke, don't fix it." If it was a printer install problem, how would the other two machines be able to make it print via the base machine? Yet it is broke in a sense if it won't print, especially when the machine it's connected to is the machine it doesn't print from. Again, that falls back to my last statement of where the drivers are installed. If the drivers are installed on all networked machines and the printer only fails on one machine, the drivers on that machine have a great possibility of being corrupt. I know little about my network. I'm not sure about the layout/architecture in the base machine. All I'm aware of is {1} a NIC and a cable to the modem and (2) the cable to the printer. Is there no router involved? I did see questions about one although a router shouldn't have any effect. The USB cable from the printer is connected directly to the 98SE machine, correct? What could be going wrong in the base machine with the combining of all three machines and the distribution to two of the machines, but not to the third. Has it ever printed to the host machine? If yes, driver corruption. If no, possibly USB version/drivers not compatible with mobo, improper USB setting in the BIOS and/or improper configuration on the host. Will it print on the host if it's not shared? Thanks again. That is, -- Brian A. Sesko { MS MVP_Windows Desktop User Experience } Conflicts start where information lacks. http://basconotw.mvps.org/ Suggested posting do's/don'ts: http://dts-l.com/goodpost.htm How to ask a question: http://support.microsoft.com/kb/555375 |
#72
|
|||
|
|||
Having strange local network printing problem - could use some hel
"normc" wrote: Using ActionTec DSL router with three machines, 2 hard-wired desktops (both 98SE) and one wireless laptop (XP). Network has always worked fine; however, at the moment the machine that is local to the shared printer hangs up. It won't print. It won't cancel the job. As a result the other two computers are unable to print, unless I reboot the one desktop, canceling the print job in the process of rebooting. Then I can print from either of the other desktop and the laptop. It can't be the cable, since it is fine for 2 of 3. It can't be the driver since the same driver is used for all print jobs to that printer. Right? Any help would be greatly appreciated. TIA Norm |
#73
|
|||
|
|||
Having strange local network printing problem - could use some hel
"normc" wrote: Using ActionTec DSL router with three machines, 2 hard-wired desktops (both 98SE) and one wireless laptop (XP). Network has always worked fine; however, at the moment the machine that is local to the shared printer hangs up. It won't print. It won't cancel the job. As a result the other two computers are unable to print, unless I reboot the one desktop, canceling the print job in the process of rebooting. Then I can print from either of the other desktop and the laptop. It can't be the cable, since it is fine for 2 of 3. It can't be the driver since the same driver is used for all print jobs to that printer. Right? Any help would be greatly appreciated. TIA Norm |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another Network Printing Problem | hancock76 | Networking | 0 | September 1st 06 01:36 PM |
Strange non-printing problem | John Earle | General | 2 | December 21st 04 05:07 PM |
Strange network connection problem | Dave Bradshaw | Networking | 2 | December 16th 04 09:37 AM |
Printing using local TCP/IP port | Dag N | Printing | 2 | October 8th 04 11:47 AM |
Printing to local Printer on LPT3 | Ben | General | 2 | June 8th 04 09:43 AM |