![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have Windows 98SE and when I recently went to start the
computer the following appeared: "A required .DLL file, C:\windows\system\msvcrt.dll wsa not found." After this, a screen appears telling me there was an error loading explorer.exe and that I need to reinstall Windows. Questions: Anyone know where/how I can find this .dll file and re-load it onto the HD without reinstalling Windows. OR If I have to reinstall, any way to do so without losing all of the other programs/files on my HD? Any help is greatly appreciated! Thanks! |
#2
|
|||
|
|||
![]()
To replace a missing or corrupt file with an original copy, you must locate
the file in the .cab files on your W98 CD. Using the machine you are posting with, open Explorer and select the folder containing the .cab files. Open the Tools menu, click Find, Files and type: *.Cab in the Named box. Type the name of the wanted file in the Containing Text box and click Find Now. This lists the .cab file your wanted file is located in. Double click the .cab file to see what's in it and right click to extract the wanted file to a floppy disk. Boot with a floppy start up disk--CDRom support is not required. If you do not have a start up disk, make one with the Fat32ebd.exe file located on the W98 CD: tools/mtsutil/fat32ebd. At the A: prompt, put in the floppy containing the file you extracted. Assuming you are replacing a .dll file named xyz, type: Copy A:\xyz.dll C:\windows\system\xyz.dll and hit enter. Once the file is copied, remove the floppy disk and reboot. While .dll files are filed in the system folder, other files may be filed elsewhere so make sure you specify the right folder. ************ Once the PC is running again, it may complain about the .dll you restored as there are many versions of it. Here is my standard blurb for that should you need it. I think the best way to explain this error message is to list an example and then walk you through the troubleshooting logic I'd use. **Example**: The LOADWC.EXE file is linked to missing export SHLWAPI.DLL:wnsprintfA File one is expecting file number two to be able to do something which it cannot do. This generally means the second file was replaced with an older version which doesn't contain the functionality that first file was expecting to find. There's a possibility file number two is corrupt or missing but most likely an older version file is the cause. In either case, replace *your* file two with a current (or more current) version. For help finding a replacement file, go here and do a search: http://support.microsoft.com/service...on/dllinfo.asp Do a search on *your* file two and be sure to include the file extension (.dll). Once the results appear, locate the version of file two that your PC is using and work up the list. When you click on the more information link, you will find what product(s) that version of the .dll is contained in. This may give you a clue as to what version of the file should be there. For example, using the sample listed above, you find version 5.0.2614.3500 of the shlwapi.dll is on file and by checking the list of files, you find this version comes with W98SE. Going up the list, you find version 5.50.4134.600 is contained in IE 5.50. If you had updated your browser to IE5.5, there's the problem--the correct version of shlwapi.dll got overwritten by the copy with comes with W98SE. Finally, the troubleshooting information above centers on file two since it should most likely be the source of the problem; however, file one could be an incorrect version or it might be corrupt. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "greg" wrote in message ... I have Windows 98SE and when I recently went to start the computer the following appeared: "A required .DLL file, C:\windows\system\msvcrt.dll wsa not found." After this, a screen appears telling me there was an error loading explorer.exe and that I need to reinstall Windows. Questions: Anyone know where/how I can find this .dll file and re-load it onto the HD without reinstalling Windows. OR If I have to reinstall, any way to do so without losing all of the other programs/files on my HD? Any help is greatly appreciated! Thanks! |
#3
|
|||
|
|||
![]()
Thanks Ron! You're a life saver!
G -----Original Message----- To replace a missing or corrupt file with an original copy, you must locate the file in the .cab files on your W98 CD. Using the machine you are posting with, open Explorer and select the folder containing the .cab files. Open the Tools menu, click Find, Files and type: *.Cab in the Named box. Type the name of the wanted file in the Containing Text box and click Find Now. This lists the .cab file your wanted file is located in. Double click the .cab file to see what's in it and right click to extract the wanted file to a floppy disk. Boot with a floppy start up disk--CDRom support is not required. If you do not have a start up disk, make one with the Fat32ebd.exe file located on the W98 CD: tools/mtsutil/fat32ebd. At the A: prompt, put in the floppy containing the file you extracted. Assuming you are replacing a .dll file named xyz, type: Copy A:\xyz.dll C:\windows\system\xyz.dll and hit enter. Once the file is copied, remove the floppy disk and reboot. While .dll files are filed in the system folder, other files may be filed elsewhere so make sure you specify the right folder. ************ Once the PC is running again, it may complain about the .dll you restored as there are many versions of it. Here is my standard blurb for that should you need it. I think the best way to explain this error message is to list an example and then walk you through the troubleshooting logic I'd use. **Example**: The LOADWC.EXE file is linked to missing export SHLWAPI.DLL:wnsprintfA File one is expecting file number two to be able to do something which it cannot do. This generally means the second file was replaced with an older version which doesn't contain the functionality that first file was expecting to find. There's a possibility file number two is corrupt or missing but most likely an older version file is the cause. In either case, replace *your* file two with a current (or more current) version. For help finding a replacement file, go here and do a search: http://support.microsoft.com/service...leversion/dlli nfo.asp Do a search on *your* file two and be sure to include the file extension (.dll). Once the results appear, locate the version of file two that your PC is using and work up the list. When you click on the more information link, you will find what product(s) that version of the .dll is contained in. This may give you a clue as to what version of the file should be there. For example, using the sample listed above, you find version 5.0.2614.3500 of the shlwapi.dll is on file and by checking the list of files, you find this version comes with W98SE. Going up the list, you find version 5.50.4134.600 is contained in IE 5.50. If you had updated your browser to IE5.5, there's the problem--the correct version of shlwapi.dll got overwritten by the copy with comes with W98SE. Finally, the troubleshooting information above centers on file two since it should most likely be the source of the problem; however, file one could be an incorrect version or it might be corrupt. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "greg" wrote in message ... I have Windows 98SE and when I recently went to start the computer the following appeared: "A required .DLL file, C:\windows\system\msvcrt.dll wsa not found." After this, a screen appears telling me there was an error loading explorer.exe and that I need to reinstall Windows. Questions: Anyone know where/how I can find this .dll file and re-load it onto the HD without reinstalling Windows. OR If I have to reinstall, any way to do so without losing all of the other programs/files on my HD? Any help is greatly appreciated! Thanks! . |
#4
|
|||
|
|||
![]() Greg, your advice was superb! And after restoring the .DLL I needed, the system did complain about "...is linked to missing export xxxxx ...". And following your subsequent instructions enabled me to get past that message. "Ron Badour" wrote: To replace a missing or corrupt file with an original copy, you must locate the file in the .cab files on your W98 CD. Using the machine you are posting with, open Explorer and select the folder containing the .cab files. Open the Tools menu, click Find, Files and type: *.Cab in the Named box. Type the name of the wanted file in the Containing Text box and click Find Now. This lists the .cab file your wanted file is located in. Double click the .cab file to see what's in it and right click to extract the wanted file to a floppy disk. Boot with a floppy start up disk--CDRom support is not required. If you do not have a start up disk, make one with the Fat32ebd.exe file located on the W98 CD: tools/mtsutil/fat32ebd. At the A: prompt, put in the floppy containing the file you extracted. Assuming you are replacing a .dll file named xyz, type: Copy A:\xyz.dll C:\windows\system\xyz.dll and hit enter. Once the file is copied, remove the floppy disk and reboot. While .dll files are filed in the system folder, other files may be filed elsewhere so make sure you specify the right folder. ************ Once the PC is running again, it may complain about the .dll you restored as there are many versions of it. Here is my standard blurb for that should you need it. I think the best way to explain this error message is to list an example and then walk you through the troubleshooting logic I'd use. **Example**: The LOADWC.EXE file is linked to missing export SHLWAPI.DLL:wnsprintfA File one is expecting file number two to be able to do something which it cannot do. This generally means the second file was replaced with an older version which doesn't contain the functionality that first file was expecting to find. There's a possibility file number two is corrupt or missing but most likely an older version file is the cause. In either case, replace *your* file two with a current (or more current) version. For help finding a replacement file, go here and do a search: http://support.microsoft.com/service...on/dllinfo.asp Do a search on *your* file two and be sure to include the file extension (.dll). Once the results appear, locate the version of file two that your PC is using and work up the list. When you click on the more information link, you will find what product(s) that version of the .dll is contained in. This may give you a clue as to what version of the file should be there. For example, using the sample listed above, you find version 5.0.2614.3500 of the shlwapi.dll is on file and by checking the list of files, you find this version comes with W98SE. Going up the list, you find version 5.50.4134.600 is contained in IE 5.50. If you had updated your browser to IE5.5, there's the problem--the correct version of shlwapi.dll got overwritten by the copy with comes with W98SE. Finally, the troubleshooting information above centers on file two since it should most likely be the source of the problem; however, file one could be an incorrect version or it might be corrupt. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "greg" wrote in message ... I have Windows 98SE and when I recently went to start the computer the following appeared: "A required .DLL file, C:\windows\system\msvcrt.dll wsa not found." After this, a screen appears telling me there was an error loading explorer.exe and that I need to reinstall Windows. Questions: Anyone know where/how I can find this .dll file and re-load it onto the HD without reinstalling Windows. OR If I have to reinstall, any way to do so without losing all of the other programs/files on my HD? Any help is greatly appreciated! Thanks! |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Missing Windows file? | Kimber | General | 2 | July 11th 04 07:46 AM |
Please help! Display settings !! | Mitzi | Monitors & Displays | 12 | July 11th 04 05:19 AM |
Major Problem | Matty | General | 3 | July 4th 04 05:02 PM |
Win98SE - problem with USB printer | HBYardSale | Software & Applications | 2 | June 20th 04 06:27 PM |
Zero-byte D: drive should not show, C: missing from Device Manager | *Vanguard* | General | 8 | June 12th 04 04:19 AM |