If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#31
|
|||
|
|||
IC - I didn't realize you had a separate USB PCI card installed. If it's
USB1, and it appears to be, then the drivers for it are on the Windows 98SE disk. Reinstall the drivers for it through the Device Manager. Right Click My Computer on the Desktop and click Device Manager. Scroll down to USB. If it's USB2, then you'll have to download the drivers from Belkin. Do you have all the Windows Updates available from Windows Update? Joe "Keith" wrote in message ... I forgot to tell you what the other USB card was. He is a copy of the Everest Home Edtion read again: Peripherals USB1 Controller ALi M5237 USB Open Host Controller USB1 Controller OPTi 82C861/2/3 FireLink USB Controller I know that the name brand on the USB card that I just got is a Belkin. Thanks again for all your help. Keith snip |
#32
|
|||
|
|||
I have tried to reinstall the drivers through device manager a few times
now and each time that I try it won't go through. When I look in Windows Update it comes up: do you want to install and run windows\temp\direct.b1. I say yes and nothing happens. When I try through the win98se CD it won't pull it off the disk. How can I tell if the USB card that I just put in from Belkin is a USB1 or a USB2? What would happen if I downloaded the drivers from Belkin for a USB2 and I actually had a USB1? I'm really confused. Keith |
#33
|
|||
|
|||
The box the USB card came in should tell you if it's USB 1 or USB2. You can
also check the model number of the USB card on Belkin's website. There is the possibility that you are getting an IRQ conflict (InteRrupt reQuest). On older motherboards, the AGP video card and the first PCI slot (the one right next to the AGP slot) can share the same IRQ. Is the USB card in the slot next to the AGP video card? If so, move it to another PCI slot. If possible, leave PCI slot 1 empty. Joe "Keith" wrote in message ... I have tried to reinstall the drivers through device manager a few times now and each time that I try it won't go through. When I look in Windows Update it comes up: do you want to install and run windows\temp\direct.b1. I say yes and nothing happens. When I try through the win98se CD it won't pull it off the disk. How can I tell if the USB card that I just put in from Belkin is a USB1 or a USB2? What would happen if I downloaded the drivers from Belkin for a USB2 and I actually had a USB1? I'm really confused. Keith |
#34
|
|||
|
|||
I know it's very hard for you guys to fix a problem in this method,
writing back and forth. I realize if you were sitting down in front of the computer with all the problems you could see what was actually happening instead of relying on some elses eyes and would be able to remedy the problem in a short period of time. I like this newsgroup because 99% of the time the problem that someone may have is fixed very quickly. I don't like to take the computer to anybody because I am trying to learn this stuff for when I retire in a couple of years. I did take it to a guy I work with so he could watch me and see if I was doing anything wrong aa to why we couldn't get the USB ports working. He noticed that the problem was that I was using the Upgrade CD instead of the Original 98SE CD. What he did was copy all the files to my C drive so when the computer asked for the Windows 98 disk all I had to do was to send it looking in the C drive. Maybe if someone could use a PC camera to show what they were doing with the instruction that you give, it would be much easier for you guys. I appreciate all the time and help you devoted to fixing my problem and would like to thank you very much. signed: Only Two Options in Display Properties--gone away, Keith. |
#35
|
|||
|
|||
So, the problem has been solved? If so, that's great and thanks for letting
us know it's fixed. I use a 98SE Update disk and have no problem extracting drivers when the New Hardware Found Wizard asks for them. However, if the method your friend uses works, then that's all that counts. As for pictures, you can upload screenshots or digital photos of what's on your monitor to your website and post links to them like I did in previous posts. Joe "Keith" wrote in message ... I know it's very hard for you guys to fix a problem in this method, writing back and forth. I realize if you were sitting down in front of the computer with all the problems you could see what was actually happening instead of relying on some elses eyes and would be able to remedy the problem in a short period of time. I like this newsgroup because 99% of the time the problem that someone may have is fixed very quickly. I don't like to take the computer to anybody because I am trying to learn this stuff for when I retire in a couple of years. I did take it to a guy I work with so he could watch me and see if I was doing anything wrong aa to why we couldn't get the USB ports working. He noticed that the problem was that I was using the Upgrade CD instead of the Original 98SE CD. What he did was copy all the files to my C drive so when the computer asked for the Windows 98 disk all I had to do was to send it looking in the C drive. Maybe if someone could use a PC camera to show what they were doing with the instruction that you give, it would be much easier for you guys. I appreciate all the time and help you devoted to fixing my problem and would like to thank you very much. signed: Only Two Options in Display Properties--gone away, Keith. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
display properties | fgoodytally | Monitors & Displays | 1 | August 29th 04 04:05 AM |
display properties | mowmow | Monitors & Displays | 1 | August 17th 04 02:49 PM |
I want to disable the Display Properties | Johnny So-Green | Monitors & Displays | 1 | August 12th 04 08:35 PM |
display reverted to vga and 16 colors for patriot computer | rosenmarsh | Monitors & Displays | 3 | July 4th 04 11:36 PM |
Display Properties | Simon | Monitors & Displays | 0 | June 18th 04 12:56 PM |