If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#9
|
|||
|
|||
I am communicating on my other computer. Is the video adapter drivers the
same thing as the videio card drivers? Yes you can run some things on the computer but they don't look right because the colors are set too low from being in safe mode. Something about it happened to the colors when the computer would only operate in safe mode. I did right click on my computer, Properties and Device Manager tab to see what was under Display Adapter and it said NVIDIA GeForce4 MX4000. I think you would call it a plug-in card because when we installed it we plugged it into the motherboard. I don't know how to install the sofware off of the CD. I put it into the CD drive and nothing comes up on screen. Otherwise I am frustrated that this site almost always says that it is "temporarily unavailable." "Gary S. Terhune" wrote: OK. Well, what you almost certainly need to do is to reinstall Display Adapter (Video Adapter) drivers. Question is, how to do that? You say you can't run any programs. Then I take it that you are communicating with us using another machine? You can't even, for instance, right-click on My Computer, then click on Properties, then on the Device Manager tab? Can you access the devices that way? Also, do you know what make/model your video adapter is? Is it "onboard", or is it a plug-in card? I'd normally suggest Everest Home Edition, from www.lavalys.com, to properly detect and identify your hardware, but if you won't be able to effectively run it on that machine, that would be a problem if you truly can't run anything on the machine as it is. -- Gary S. Terhune MS-MVP Shell/User "Rose" wrote in message ... Dear Mr. Terhune, If I perform a normal startup the system starts successfully and shuts down properly. The display settings do not perform properly in that when you click on "Display", "Settings" it goes blank and doesn't allow any settings to be set. You have to hit control-alt-del to restart windows from the beginning because it gets hung up there. I can't run any programs because the color setting is too low from when it was in safemode before this normal startup. It's a good fast running 2.8 ghz computer, just a bad dicision to save money to put win98 on it and it's not that old. "Gary S. Terhune" wrote: OK, Rose. What I've been trying to get to is that the Config.sys issue may be a red herring--may have nothing at all to do with your problem. Again, if you perform a Normal Startup, with everything enabled in MSCONFIG, does the system start up successfully? Does Display Settings perform properly? Does it shut down properly? Test several times. I think we're chasing phantoms, here. I'd like to return to ground zero and follow your steps more closely. -- Gary S. Terhune MS-MVP Shell/User "Rose" wrote in message ... Yes Mrs. Terhune, there is a config.sys tab. Nothing in it though. "Gary S. Terhune" wrote: Just to make sure, run MSCONFIG from the Start\Run box. Is there a Config.sys tab, and if so, is there anything in it? If you do a Normal restart now, does the problem return? -- Gary S. Terhune MS-MVP Shell/User "Rose" wrote in message ... Yes I did Step-by-Step from the startup menu. There is a config.pss file that is empty and a couple of config files with no extension. One is blank and the other has "MIDI Instrument Definition" written in it. There is a couple of text config files, one with instructions the other is huge having to do with a game I think. If you want me to use Dos to find the config.sys file, hmmmm I don't remember my Dos commands. I used the "Find" option in windows. Thank you so much. Is there anything else I need to do that you can think of? "Gary S. Terhune" wrote: What do you mean by "diagnostic startup"? Did you use "Step-by-Step" from the Startup Menu. or did you use settings in MSCONFIG (System Configuration Utility), or what? Reason I ask, is I'd like to know what's in your CONFIG.SYS, but it may have been renamed to CONFIG.TSH or something else. Suggest you look for any C:\CONFIG.xxx where xxx is any extension. Use Notepad to open them and Copy/Paste the contents of each here. -- Gary S. Terhune MS-MVP Shell/User "Rose" wrote in message ... I ran the diagnostic startup to bypass configsys file and that fixed the problem with hanging up at startup, now when I click on Control panel, Display, Settings the screen goes blank and hangs up win98. Are there any answers to this mystery? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Display Settings for ME | Haydzagain | General | 4 | April 21st 05 11:22 AM |
Tough one: Display settings won't save in Windows 98 | [email protected] | General | 3 | January 17th 05 08:12 AM |
Can't change display settings | Ian A | Monitors & Displays | 7 | July 11th 04 08:19 PM |
Incorrect display settings! | Andy | Monitors & Displays | 2 | June 20th 04 03:02 AM |
problem with display settings | dave | Monitors & Displays | 1 | June 10th 04 02:31 AM |