If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Mouse arrow inactive in safe Mode
Mouse arrow which is active otherwise in normal mode becomes inactive in safe
Mode. Thanks for any solution to this problem. |
#2
|
|||
|
|||
"Baba" wrote in message
... Mouse arrow which is active otherwise in normal mode becomes inactive in safe Mode. Thanks for any solution to this problem. Is it a USB mouse? If so, there are no USB drivers loaded in safe mode. You can get it to work in safe mode by enabling Legacy Mouse Support (or some similar item) in BIOS. This will cause BIOS to enable it's driver, catch mouse operations, and emulate a PS/2 mouse for the sake of Windows in safe mode. Alternatively, you can get a USB to PS/2 mouse adapter and actually plug your USB mouse into the PS/2 port (if your computer has one). - Bill |
#3
|
|||
|
|||
Thank you, Bill, for enlightening and offering a way out.
It is a USB mouse. I'll check up for the rest and act as per your advice. Thanks once again. - Baba "Bill Leary" wrote: "Baba" wrote in message ... Mouse arrow which is active otherwise in normal mode becomes inactive in safe Mode. Thanks for any solution to this problem. Is it a USB mouse? If so, there are no USB drivers loaded in safe mode. You can get it to work in safe mode by enabling Legacy Mouse Support (or some similar item) in BIOS. This will cause BIOS to enable it's driver, catch mouse operations, and emulate a PS/2 mouse for the sake of Windows in safe mode. Alternatively, you can get a USB to PS/2 mouse adapter and actually plug your USB mouse into the PS/2 port (if your computer has one). - Bill |
#4
|
|||
|
|||
I could enter into BIOS (first timer) but could not locate something like
Legacy support for the mouse or some such identical entry. Being novice, I didn't dare to go for trial and error method and tamper BIOS setup. If some illustrative details of steps possible to furnish, I shall be grateful. (System: Win Me, BIOS: Award Software International Inc, Version: 6.00 PG, BIOS Size: 256 KB, Supports legacy USB) "Baba" wrote: Thank you, Bill, for enlightening and offering a way out. It is a USB mouse. I'll check up for the rest and act as per your advice. Thanks once again. - Baba "Bill Leary" wrote: "Baba" wrote in message ... Mouse arrow which is active otherwise in normal mode becomes inactive in safe Mode. Thanks for any solution to this problem. Is it a USB mouse? If so, there are no USB drivers loaded in safe mode. You can get it to work in safe mode by enabling Legacy Mouse Support (or some similar item) in BIOS. This will cause BIOS to enable it's driver, catch mouse operations, and emulate a PS/2 mouse for the sake of Windows in safe mode. Alternatively, you can get a USB to PS/2 mouse adapter and actually plug your USB mouse into the PS/2 port (if your computer has one). - Bill |
#5
|
|||
|
|||
"Baba" wrote in message
... I could enter into BIOS (first timer) but could not locate something like Legacy support for the mouse or some such identical entry. That's a little surprising, but not impossible. It may actually NOT have such an option. Being novice, I didn't dare to go for trial and error method and tamper BIOS setup. Wise. If some illustrative details of steps possible to furnish, I shall be grateful. (System: Win Me, BIOS: Award Software International Inc, Version: 6.00 PG, BIOS Size: 256 KB, Supports legacy USB) That "Supports legacy USB" implies that it HAS the feature you're looking for. Setup manuals are available here. http://www.phoenix.com/en/Customer+S...nformation.htm If your machine was built after July 1996, you have to know which chipset it uses to pick the correct manual. I've looked at two of them and they don't mention Legacy Mouse support at all. Indeed, they don't mention USB at all. How old is this system? Are the USB ports on the motherboard? Anyway, your simplest solution might be to get a USB to PS/2 adapter. I've just looked around (CompUSA, Staples, New Egg) and only found one, for close to $70, and way more feature rich than you need. The one I've got came with my Microsoft Optical Wheel Mouse, and is just barely big enough to contain a USB socket and a PS/2 plug. I did notice that a fair number of the mice on those sites indicates support for both USB and PS/2, and several of them mention that is done with an included adapter. Perhaps there was one with yours? Or perhaps you know someone who got a mouse which included and adapter, which they're not using. - Bill |
#6
|
|||
|
|||
"Bill Leary" wrote: "Baba" wrote in message ... I could enter into BIOS (first timer) but could not locate something like Legacy support for the mouse or some such identical entry. That's a little surprising, but not impossible. It may actually NOT have such an option. Being novice, I didn't dare to go for trial and error method and tamper BIOS setup. Wise. If some illustrative details of steps possible to furnish, I shall be grateful. (System: Win Me, BIOS: Award Software International Inc, Version: 6.00 PG, BIOS Size: 256 KB, Supports legacy USB) That "Supports legacy USB" implies that it HAS the feature you're looking for. Setup manuals are available here. http://www.phoenix.com/en/Customer+S...nformation.htm If your machine was built after July 1996, you have to know which chipset it uses to pick the correct manual. I've looked at two of them and they don't mention Legacy Mouse support at all. Indeed, they don't mention USB at all. How old is this system? Are the USB ports on the motherboard? The machine is branded one purchased in mid 2001. The motherboard chipset is VIA VT8601A Apollo PLE133 (motherboard: MSIMS-6368), but it doesn't find place in Setup manuals link above. I don't know if the USB ports at the back of the system case where the mouse is connected, are on the motherboard. I'm scared to open the system Anyway, your simplest solution might be to get a USB to PS/2 adapter. I've just looked around (CompUSA, Staples, New Egg) and only found one, for close to $70, and way more feature rich than you need. The one I've got came with my Microsoft Optical Wheel Mouse, and is just barely big enough to contain a USB socket and a PS/2 plug. I did notice that a fair number of the mice on those sites indicates support for both USB and PS/2, and several of them mention that is done with an included adapter. Perhaps there was one with yours? Or perhaps you know someone who got a mouse which included and adapter, which they're not using. - Bill From your feed back (thanks a lot !), I could make out that there are PS/2 ports on the back of the system case. One is used for connecting the keyboard (without any adapter)and the other, as my previous user informs (the machine has changed hands), was used for mouse through adapter but since the mouse stopped working with the adapter, but worked from USB port directly, it was not considered necessary to do anything. I've now got that adapter and tried myself, but mouse stops working even in normal mode. I just want to confirm that everything is in order except the adapter before I replace it. I could search for the exact one on http://www.ramelectronics.net/html/usb-ps2-adapter.htm named as "PS/2 to USB mouse converter" (USB 'A' female to PS/2 male - green colored). Thanks! - Baba |
#7
|
|||
|
|||
"Baba" wrote in message
news From your feed back (thanks a lot !), I could make out that there are PS/2 ports on the back of the system case. One is used for connecting the keyboard (without any adapter) Right. It's a PS/2 keyboard. and the other, as my previous user informs (the machine has changed hands), was used for mouse through adapter but since the mouse stopped working with the adapter, but worked from USB port directly, it was not considered necessary to do anything. I've now got that adapter and tried myself, but mouse stops working even in normal mode. Yes, it would if the adapter OR the PS/2 port is broken. I just want to confirm that everything is in order except the adapter before I replace it. I could search for the exact one on http://www.ramelectronics.net/html/usb-ps2-adapter.htm named as "PS/2 to USB mouse converter" (USB 'A' female to PS/2 male - green colored). That's looks like the one I'm using right now. Usually, you can just move the mouse from USB to PS/2 and the system will see it and work correctly. Sometimes you have to reboot. Somtimes you have to change something in BIOS or Windows to get it to work on PS/2 after running on USB. This would pretty much ONLY be the case if your mouse driver has been set to only look on USB for the mouse. I never changed anything and could move the mouse freely between the two connectors with only a system reboot to get it to see it in it's new location. If you can borrow a PS/2 mouse to see if the port works, you might want to do that first. Of course, $9 isn't much (and thanks for the link, by the way) so it's not like it'll cost you a lot if the port itself is dead rather than the adapter you have now. - Bill |
#8
|
|||
|
|||
"William J. Leary Jr." wrote: "Baba" wrote in message news From your feed back (thanks a lot !), I could make out that there are PS/2 ports on the back of the system case. One is used for connecting the keyboard (without any adapter) Right. It's a PS/2 keyboard. and the other, as my previous user informs (the machine has changed hands), was used for mouse through adapter but since the mouse stopped working with the adapter, but worked from USB port directly, it was not considered necessary to do anything. I've now got that adapter and tried myself, but mouse stops working even in normal mode. Yes, it would if the adapter OR the PS/2 port is broken. I just want to confirm that everything is in order except the adapter before I replace it. I could search for the exact one on http://www.ramelectronics.net/html/usb-ps2-adapter.htm named as "PS/2 to USB mouse converter" (USB 'A' female to PS/2 male - green colored). That's looks like the one I'm using right now. Usually, you can just move the mouse from USB to PS/2 and the system will see it and work correctly. Sometimes you have to reboot. Somtimes you have to change something in BIOS or Windows to get it to work on PS/2 after running on USB. This would pretty much ONLY be the case if your mouse driver has been set to only look on USB for the mouse. I never changed anything and could move the mouse freely between the two connectors with only a system reboot to get it to see it in it's new location. If you can borrow a PS/2 mouse to see if the port works, you might want to do that first. Of course, $9 isn't much (and thanks for the link, by the way) so it's not like it'll cost you a lot if the port itself is dead rather than the adapter you have now. - Bill Bill, I can't thank you enough for your time and efforts in helping me to resolve the issue. Reboot has done all that was necessary. Regards, - Baba |
#9
|
|||
|
|||
"Baba" wrote in message
... Bill, I can't thank you enough for your time and efforts in helping me to resolve the issue. Reboot has done all that was necessary. Glad to hear it. And thanks again for that link. I want to get another of those adapters for a system I'm having similar problems with at work. - Bill |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ps/2 mouse only works in safe mode, not normal mode | Frau Frank | General | 3 | May 30th 05 05:56 PM |
serial mouse no where to be seen | twins2 | Hardware | 18 | January 28th 05 10:48 AM |
My Mouse still does not work in safe mode 2nd request | Dan | General | 42 | January 21st 05 01:36 AM |
AV software and PC in safe mode | Jane | New Users | 20 | July 1st 04 08:57 PM |
Wheel Mouse won't work. Driver?? BTC M370 | Big Mac | General | 3 | June 10th 04 02:21 AM |