If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can't get past splash screen
A friend's laptop recently went faulty so he decided, as it's 7 years old,
to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John |
#2
|
|||
|
|||
Can't get past splash screen
I think, and Mike can correct me on this, but if you've got a WinME boot
floppy you should be able to get to the A:\ prompt and that'll get you past that. Further instructions will come later from those who know better. John replyingroup@notemail wrote: A friend's laptop recently went faulty so he decided, as it's 7 years old, to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John |
#3
|
|||
|
|||
Can't get past splash screen
"Windows could not upgrade the file %1 from %2
%1: %2" Don't you just love Norton, the most common cause of this problem. The %1 %2 problem you saw is usually quite easy to fix and is often but not exclusively the result of having Symantec's LiveUpdate installed. First boot to DOS using a floppy and check whether you have a WININIT.INI file in your C:\WINDOWS folder. If present rename it to something like wininit.old and try booting again. It is also probable that you will have to repeat the last software install or update that you made. See MS KB283069 - "Error Message: Windows Could Not Upgrade the File %1 from %2 %1: %2 (http://support.microsoft.com?kbid=283069). If you can't find a wininit.ini file then I suspect your problem is due to the C:\_RESTORE\TEMP folder having around 64K files in it which is the limit (2**16) for the number of files that can be located in a folder using the FAT32 filing system. This then results in the "Cannot upgrade file %1 from %2.." message when booting. I suggest you try deleting the _RESTORE folder with the loss of any system restore checkpoints you might have (not that I think they are now usable) and see if that solves the problem. Delete the folder as follows: a) Boot to DOS using a floppy. Do NOT choose "Minimal Boot" from the menu when booting from a floppy but rather choose "Start computer with (or without) CD-ROM support" otherwise the ATTRIB command will not be available. b) At the DOS A:\ prompt, type: ATTRIB -H -S -R C:\_RESTORE and then REN C:\_RESTORE OLDREST c) Remove the floppy d) Reboot your PC Another problem is that the install/update you were doing will not have been completely installed so your system may still be unusable and the install/update will need to be repeated. e) Delete the folder C:\OLDREST f) Check that an automatic system restore checkpoint was created. g) Finally adjust the space allocated to the restore folder: System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. A figure of 200MB is normally more than adequate for day to day use allowing perhaps a week of checkpoints to be available although increasing this to perhaps 400MB for a few days during periods of large installs such Microsoft Office is advisable. -- Mike Maltby MS-MVP Windows John replyingroup@notemail wrote: A friend's laptop recently went faulty so he decided, as it's 7 years old, to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John |
#4
|
|||
|
|||
Can't get past splash screen
It probably has Norton's System Works 2000 installed - because it doesn't
(work, that is!!) See - You receive a "Windows could not upgrade the file %1 from %2 %1: %2" error message after you install a new program or update a program on a computer that is running Windows Millennium Edition. http://support.microsoft.com/kb/283069/en-us Read (and print a copy of the Resolutions) and follow the instructions carefully - and be sure to never let Norton near the PC again. Norton and WinMe don't mix. Mart "John" replyingroup@notemail wrote in message ... A friend's laptop recently went faulty so he decided, as it's 7 years old, to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John |
#5
|
|||
|
|||
Can't get past splash screen
Mart wrote:
It probably has Norton's System Works 2000 installed - because it doesn't (work, that is!!) See - You receive a "Windows could not upgrade the file %1 from %2 %1: %2" error message after you install a new program or update a program on a computer that is running Windows Millennium Edition. http://support.microsoft.com/kb/283069/en-us Read (and print a copy of the Resolutions) and follow the instructions carefully - and be sure to never let Norton near the PC again. Norton and WinMe don't mix. Mart "John" replyingroup@notemail wrote in message ... A friend's laptop recently went faulty so he decided, as it's 7 years old, to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John Wow, that's brilliant. Thanks everyone for your replies, it's much appreciated. John |
#6
|
|||
|
|||
Can't get past splash screen
Mike M wrote:
"Windows could not upgrade the file %1 from %2 %1: %2" Don't you just love Norton, the most common cause of this problem. The %1 %2 problem you saw is usually quite easy to fix and is often but not exclusively the result of having Symantec's LiveUpdate installed. First boot to DOS using a floppy and check whether you have a WININIT.INI file in your C:\WINDOWS folder. If present rename it to something like wininit.old and try booting again. It is also probable that you will have to repeat the last software install or update that you made. See MS KB283069 - "Error Message: Windows Could Not Upgrade the File %1 from %2 %1: %2 (http://support.microsoft.com?kbid=283069). If you can't find a wininit.ini file then I suspect your problem is due to the C:\_RESTORE\TEMP folder having around 64K files in it which is the limit (2**16) for the number of files that can be located in a folder using the FAT32 filing system. This then results in the "Cannot upgrade file %1 from %2.." message when booting. I suggest you try deleting the _RESTORE folder with the loss of any system restore checkpoints you might have (not that I think they are now usable) and see if that solves the problem. Delete the folder as follows: a) Boot to DOS using a floppy. Do NOT choose "Minimal Boot" from the menu when booting from a floppy but rather choose "Start computer with (or without) CD-ROM support" otherwise the ATTRIB command will not be available. b) At the DOS A:\ prompt, type: ATTRIB -H -S -R C:\_RESTORE and then REN C:\_RESTORE OLDREST c) Remove the floppy d) Reboot your PC Another problem is that the install/update you were doing will not have been completely installed so your system may still be unusable and the install/update will need to be repeated. e) Delete the folder C:\OLDREST f) Check that an automatic system restore checkpoint was created. g) Finally adjust the space allocated to the restore folder: System | Performance | File System | Hard Disk and adjust the restore slider to your preferred setting. A figure of 200MB is normally more than adequate for day to day use allowing perhaps a week of checkpoints to be available although increasing this to perhaps 400MB for a few days during periods of large installs such Microsoft Office is advisable. A friend's laptop recently went faulty so he decided, as it's 7 years old, to treat himself to a new one. However, he needs a couple of things off the old one if at all possible, so he brought it to me. It boots, completes the POST OK and then shows the Windows ME splash screen - but gets no further, no matter how long you leave it. Pressing the "Esc" key to get rid of the splash screen and see what's going on reveals the following text: "Please wait while setup updates your config files. This may take a few minutes". After about two minutes, it shows: "Windows could not upgrade the file %1 from %2 %1: %2" and that message repeats at two minute intervals for as long as you leave it. Any ideas what's wrong and how to get past it? Thanks in advance, John Renaming wininit.ini to wininit.old did the trick - and yes, once I got it up and running one of the first dialog boxes to come up was Norton saying that an update hadn't completed. Thanks ever so much, John |
#7
|
|||
|
|||
Can't get past splash screen
John,
I'm pleased to read that you managed to fix the problem. I would now very strongly urge you to clear the C:\_RESTORE folder as explained in my previous post otherwise you are likely to hit the same error next time the wininit.ini mechanism is invoked by an update. I think you will find that there are currently over 32,000 items in the C:\_RESTORE\TEMP folder, perhaps even 64,000 (I can't remember the trigger number). -- Mike Maltby John replyingroup@notemail wrote: Renaming wininit.ini to wininit.old did the trick - and yes, once I got it up and running one of the first dialog boxes to come up was Norton saying that an update hadn't completed. Thanks ever so much, |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't get past splash screen | John[_2_] | General | 6 | May 1st 08 02:24 PM |
startup won't go past Windows ME screen | jjjimmys | General | 12 | February 9th 05 03:42 PM |
splash screen | Réjean Cloutier | General | 5 | September 10th 04 01:19 PM |
Splash screen | RipperT | General | 5 | August 29th 04 07:24 PM |
Can't Get Past Log On Screen | Kim | Improving Performance | 1 | June 28th 04 08:40 PM |