Mike
As I mentioned earlier that the WinXP is
on the Laptop which is connected via the
Wireless. It is fine there is no problem
with this machine.

The problem is with the WinMe desktop
computer.The BTHomeHub Ver 2.0 T9J3
cannot get itself connected to this computer.
I think it is somewhere at the TCP/IP(Network) property tabs. The DNS
Configuration tab
the DNS is disabled.
Is it correct? or should be enabled?


"Mike M" wrote in message
...
AAH,

Those numbers show that you are connected to the router so please can you
explain what problems you are seeing. If you weren't connected you would
not have had a 192.168.1.xxx address allocated to the NIC nor would you
have any of the Gateway, DHCP or DNS boxes populated.
--
Mike


AAH wrote:

Mike
Thanks for the details.
WinXP
IP Add 192.168.1.64
SubMask 255.255.255.0

DGateway 192.168.1.254
DHCP Server 192.168.1.254
DNS Server 192.168.1.254

The TF3200 adapter software has provided clearly separate driver for
WinMe and the setup at the end certify
that " Found the Adapter and install/update
successfully" and the device manager does
not show any sign of error.
The adapter standard is marked on the pack
is 802.3