PDA

View Full Version : Both D & E


jlh8450
May 23rd 04, 08:08 PM
Windows ME My cdrw & dvd both will not run ,System will
not detect them ? What to do ?

Mike M
May 23rd 04, 08:17 PM
What do you see under CD-ROM devices and IDE controllers in the Device
Manager? [Control Panel | System | Device Manager].
--
Mike Maltby MS-MVP



jlh8450 > wrote:

> Windows ME My cdrw & dvd both will not run ,System will
> not detect them ? What to do ?

May 24th 04, 12:22 AM
I had problems with my computer not detecting my cdrom.I
heard that it will not run as a slave.I checked in my bios
setup and sure enough,it was under secondary slave.I
changed it to secondary master and changed slave to not
installed.It now works fine.
>-----Original Message-----
>What do you see under CD-ROM devices and IDE controllers
in the Device
>Manager? [Control Panel | System | Device Manager].
>--
>Mike Maltby MS-MVP

>
>
>jlh8450 > wrote:
>
>> Windows ME My cdrw & dvd both will not run ,System will
>> not detect them ? What to do ?
>
>
>.
>

shelly
May 24th 04, 01:10 AM
Hi there,

I have been having the same problem my CD-ROM drive not
working after installing WindowsME. It is listed in my
Bios setup, how did you go about changing it to a
secondary master or for that fact know it was under
secondary slave? I have gotten a lot of confusing advice
in postings. Hope you can help thanks

Shelly

>-----Original Message-----
> I had problems with my computer not detecting my
cdrom.I
>heard that it will not run as a slave.I checked in my
bios
>setup and sure enough,it was under secondary slave.I
>changed it to secondary master and changed slave to not
>installed.It now works fine.

Mike M
May 24th 04, 01:21 AM
Shelly,

You've been told again and again that your problem is due to your secondary
controller not being configured correctly. That you choose to ignore that
advice or don't understand what you have been told doesn't mean that it is
either incorrect or confusing. You've also been advised to seek professional
technical help since you seem unwilling or unable to follow the suggestions
that have been repeatedly posted here over the last week.
--
Mike Maltby MS-MVP



shelly > wrote:

> Hi there,
>
> I have been having the same problem my CD-ROM drive not
> working after installing WindowsME. It is listed in my
> Bios setup, how did you go about changing it to a
> secondary master or for that fact know it was under
> secondary slave? I have gotten a lot of confusing advice
> in postings. Hope you can help thanks

Shelly
May 26th 04, 03:58 AM
Well Mike you're right you have given me advice and I have
followed most of the advice. But he said he was able to
change it from his Secondary to his master and that's what
I was asking how he did it. I wasn't ignoring your help or
advice or anyone else's. I have tried just about all the
advice on here that I was able to do or understand. And
obviously I'm not the only one having a problem since
there has been three or four other postings with the same
issue. I appreciate your help and everyone's help.
>-----Original Message-----
>Shelly,
>
>You've been told again and again that your problem is due
to your secondary
>controller not being configured correctly. That you
choose to ignore that
>advice or don't understand what you have been told
doesn't mean that it is
>either incorrect or confusing. You've also been advised
to seek professional
>technical help since you seem unwilling or unable to
follow the suggestions
>that have been repeatedly posted here over the last week.
>--
>Mike Maltby MS-MVP

>
>

Al
May 27th 04, 01:02 AM
>-----Original Message-----
> I had problems with my computer not detecting my
cdrom.I
>heard that it will not run as a slave.I checked in my
bios
>setup and sure enough,it was under secondary slave.I
>changed it to secondary master and changed slave to not
>installed.It now works fine.
>>-----Original Message-----
>>What do you see under CD-ROM devices and IDE controllers
>in the Device
>>Manager? [Control Panel | System | Device Manager].
>>--
>>Mike Maltby MS-MVP

>>
>>
>>jlh8450 > wrote:
>>
>>> Windows ME My cdrw & dvd both will not run ,System will
>>> not detect them ? What to do ?
>>
>>
>>.I have the same problem, no cd rom anymore, can someone
advise me. I checked my bios and sec master, and sec slave
shows cd rom, but I get atapi incompatible, what gives I
had both sometime ago..

Al
>>
>.
>