PDA

View Full Version : Windows ME Modems


shadows_inthe_darkness2000
May 7th 04, 01:59 PM
Hi all

I have a WinME system that when I add ANY modem it is not listed in the
available modems list.

I have installed a SiteCom D015 Softmodem which is seen on Com3 and I can
run diags on it and communicate with it using Hyperterminal. However, as it
does not appear on the installed modem list I can not create a new dial up
networking entry.

I have reinstalled multiple times and tried adding a Standard 56k V90 modem
as well. Nothing seems to work, does anyone have any ideas?

Please contact me at

many thanks!

Noel Paton
May 8th 04, 10:30 AM
Reboot to Safe Mode
Open Device Manager
Remove ALL Modem devices
Reboot to Normal Mode - windows should reinstall the correct drivers

If that doesn't work, change the slot that your modem is plugged into, and
repeat the above - see if that helps

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp
"shadows_inthe_darkness2000" > wrote
in message ...
> Hi all
>
> I have a WinME system that when I add ANY modem it is not listed in the
> available modems list.
>
> I have installed a SiteCom D015 Softmodem which is seen on Com3 and I can
> run diags on it and communicate with it using Hyperterminal. However, as
it
> does not appear on the installed modem list I can not create a new dial up
> networking entry.
>
> I have reinstalled multiple times and tried adding a Standard 56k V90
modem
> as well. Nothing seems to work, does anyone have any ideas?
>
> Please contact me at
>
> many thanks!
>
>

shadows_inthe_darkness2000
May 8th 04, 10:16 PM
Thanks Noel, I will give that a try!

Bob


"Noel Paton" > wrote in message
...
> Reboot to Safe Mode
> Open Device Manager
> Remove ALL Modem devices
> Reboot to Normal Mode - windows should reinstall the correct drivers
>
> If that doesn't work, change the slot that your modem is plugged into, and
> repeat the above - see if that helps
>
> --
> Noel Paton (MS-MVP 2002-2004, Win9x)
>
> Nil Carborundum Illegitemi
> http://www.btinternet.com/~winnoel/millsrpch.htm
>
> Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
> or
> http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp
> "shadows_inthe_darkness2000" >
wrote
> in message ...
> > Hi all
> >
> > I have a WinME system that when I add ANY modem it is not listed in the
> > available modems list.
> >
> > I have installed a SiteCom D015 Softmodem which is seen on Com3 and I
can
> > run diags on it and communicate with it using Hyperterminal. However, as
> it
> > does not appear on the installed modem list I can not create a new dial
up
> > networking entry.
> >
> > I have reinstalled multiple times and tried adding a Standard 56k V90
> modem
> > as well. Nothing seems to work, does anyone have any ideas?
> >
> > Please contact me at
> >
> > many thanks!
> >
> >
>
>

shadows_inthe_darkness2000
May 11th 04, 11:29 PM
Noel,
Sad to say that the tips you gave have not helped, the problem persists and
I am wondering weather I should just reinstall and save some time!

Any modem I add does not get a listing, no listing - no adding of
dial-up-networking. I have tried 2 attached modems, one by cable and one PCI
card. The PCI card can be seen on COM3, and passed diags. The COM port based
modem after install with CD does not get listed nor seen on a COM port.
Indeed now the COM ports are getting confused with COM2 and COM5!!!! I have
added a standard modem from the list (any of them) and no listing. I am not
sure if ME should but it does not give the option to search for a modem on
the COM ports. It seems as though the whole modem system within WinME is up
the creak. One strange thing though is that all the modems I have tried to
add is seen in Device Manager.

I am wondering if there is a registry problem, however I am not sure where
to look. I dont want to reinstall but they may be the only option. If you or
anyone else has any views then please let me know!!!!!!!!!!!!

thanks for all the help so far.

Bob




"shadows_inthe_darkness2000" > wrote
in message ...
> Thanks Noel, I will give that a try!
>
> Bob
>
>
> "Noel Paton" > wrote in message
> ...
> > Reboot to Safe Mode
> > Open Device Manager
> > Remove ALL Modem devices
> > Reboot to Normal Mode - windows should reinstall the correct drivers
> >
> > If that doesn't work, change the slot that your modem is plugged into,
and
> > repeat the above - see if that helps
> >
> > --
> > Noel Paton (MS-MVP 2002-2004, Win9x)
> >
> > Nil Carborundum Illegitemi
> > http://www.btinternet.com/~winnoel/millsrpch.htm
> >
> > Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
> > or
> > http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp
> > "shadows_inthe_darkness2000" >
> wrote
> > in message ...
> > > Hi all
> > >
> > > I have a WinME system that when I add ANY modem it is not listed in
the
> > > available modems list.
> > >
> > > I have installed a SiteCom D015 Softmodem which is seen on Com3 and I
> can
> > > run diags on it and communicate with it using Hyperterminal. However,
as
> > it
> > > does not appear on the installed modem list I can not create a new
dial
> up
> > > networking entry.
> > >
> > > I have reinstalled multiple times and tried adding a Standard 56k V90
> > modem
> > > as well. Nothing seems to work, does anyone have any ideas?
> > >
> > > Please contact me at
> > >
> > > many thanks!
> > >
> > >
> >
> >
>
>

Jack E Martinelli
May 12th 04, 01:42 PM
Perhaps this will help:

Com Port configuration

http://www.easysync.co.uk/COMPortGuide.htm

--
Jack E. Martinelli 2002-04 MVP for Win9X / DTS
Help us help you: http://www.dts-L.org/goodpost.htm
http://www.microsoft.com/security/protect/
Your cooperation is very appreciated.
____
"shadows_inthe_darkness2000" >
wrote in message ...
> Noel,
> Sad to say that the tips you gave have not helped, the problem
persists and
> I am wondering weather I should just reinstall and save some time!
>
> Any modem I add does not get a listing, no listing - no adding of
> dial-up-networking. I have tried 2 attached modems, one by cable and
one PCI
> card. The PCI card can be seen on COM3, and passed diags. The COM port
based
> modem after install with CD does not get listed nor seen on a COM
port.
> Indeed now the COM ports are getting confused with COM2 and COM5!!!! I
have
> added a standard modem from the list (any of them) and no listing. I
am not
> sure if ME should but it does not give the option to search for a
modem on
> the COM ports. It seems as though the whole modem system within WinME
is up
> the creak. One strange thing though is that all the modems I have
tried to
> add is seen in Device Manager.
>
> I am wondering if there is a registry problem, however I am not sure
where
> to look. I dont want to reinstall but they may be the only option. If
you or
> anyone else has any views then please let me know!!!!!!!!!!!!
>
> thanks for all the help so far.
>
> Bob
>
>
>
>
> "shadows_inthe_darkness2000" >
wrote
> in message ...
> > Thanks Noel, I will give that a try!
> >
> > Bob
> >
> >
> > "Noel Paton" > wrote in message
> > ...
> > > Reboot to Safe Mode
> > > Open Device Manager
> > > Remove ALL Modem devices
> > > Reboot to Normal Mode - windows should reinstall the correct
drivers
> > >
> > > If that doesn't work, change the slot that your modem is plugged
into,
> and
> > > repeat the above - see if that helps
> > >
> > > --
> > > Noel Paton (MS-MVP 2002-2004, Win9x)
> > >
> > > Nil Carborundum Illegitemi
> > > http://www.btinternet.com/~winnoel/millsrpch.htm
> > >
> > > Please read http://dts-l.org/goodpost.htm on how to post messages
to
> NG's
> > > or
> > >
http://www.microsoft.com/presspass/features/2001/Mar01/Mar27pmvp.asp
> > > "shadows_inthe_darkness2000"
>
> > wrote
> > > in message ...
> > > > Hi all
> > > >
> > > > I have a WinME system that when I add ANY modem it is not listed
in
> the
> > > > available modems list.
> > > >
> > > > I have installed a SiteCom D015 Softmodem which is seen on Com3
and I
> > can
> > > > run diags on it and communicate with it using Hyperterminal.
However,
> as
> > > it
> > > > does not appear on the installed modem list I can not create a
new
> dial
> > up
> > > > networking entry.
> > > >
> > > > I have reinstalled multiple times and tried adding a Standard
56k V90
> > > modem
> > > > as well. Nothing seems to work, does anyone have any ideas?
> > > >
> > > > Please contact me at
> > > >
> > > > many thanks!
> > > >
> > > >
> > >
> > >
> >
> >
>
>