NDIS.VXD Problem

[Richard]

I have a machine running windows ME.

I get a blue screen if I enable the NDIS.VXD but if not,
all is well.

I have replaced the NIC, removed and re-installed DUN and
TCP/IP, but the problem won't go away.


I have extracted a new copy of NDIS, but I am stuck.

Any ideas?

[Jack E Martinelli]

Hang at Startup or Shutdown with Ndis.vxd Enabled
http://support.microsoft.com/default.aspx?scid=kb;en-us;261766&Product=winme

RESOLUTION
To determine the possible cause of the issue, start your computer in a
"clean" configuration,
perform a logged boot, and then look at the last entry in the
Bootlog.txt file. The last entry
should be the device or virtual device driver that is not being loaded
or unloaded correctly.


A Description of Static Virtual Device Drivers (VxDs) in the Msconfig
Utility
http://support.microsoft.com/default.aspx?scid=kb;en-us;273843&Product=winme

HOWTO: Use Network Setup Debug Extensions to NetDI for Windows ME
http://support.microsoft.com/default.aspx?scid=kb;en-us;282757&Product=winme

HOWTO: NDIS Debugging Tips for Windows ME
http://support.microsoft.com/default.aspx?scid=kb;en-us;279356&Product=winme


Good luck,
--
Jack E. Martinelli 2002-04 MVP for Win9X / DTS
Help us help you: http://www.dts-L.org/goodpost.htm
http://www.microsoft.com/security/protect/
Your cooperation is very appreciated.
____
"Richard" > wrote in message
...
> I have a machine running windows ME.
>
> I get a blue screen if I enable the NDIS.VXD but if not,
> all is well.
>
> I have replaced the NIC, removed and re-installed DUN and
> TCP/IP, but the problem won't go away.
>
>
> I have extracted a new copy of NDIS, but I am stuck.
>
> Any ideas?
>