defragmenting disc C

[Fred]

I am using the Maintenance Wizard. It has checked my disc
for faults, got rid of unwanted files but seems stuck in
the Defragmenting Mode as it has now been running for
three nights and still shows only 1%. Is this normal or
have I a problem?

[Mart]

Either try running Defrag in Safe Mode and/or download and run ScanDefrag
v4.2a.

This is a FREE utility, written by several well respected contributors to
these News Groups and has been designed to run several original MS utilities
through a 'filter' which eliminates the usual junk which stops Defrag (and
Scandisk) from running properly in Normal Mode - as you are already
experiencing <g>

You can get ScanDefrag at either of the two sites below - and be sure to
read the associated notes for setting it up:
http://home.earthlink.net/~bblanton2/scandefrag/main.htm
http://www.blueorbsoft.com/scandefrag/index.html

HTH and good luck

Mart


"Fred" > wrote in message
...
> I am using the Maintenance Wizard. It has checked my disc
> for faults, got rid of unwanted files but seems stuck in
> the Defragmenting Mode as it has now been running for
> three nights and still shows only 1%. Is this normal or
> have I a problem?