? lost driver (Broadband)

[loons]

On tryingto load Wanadoo Broadband to my Packard
Bell 'pulsar 20' I can only get as far as the
message "Speedtouch network support driver not found "
I am using the Speedtouch330 modem.
Any ideas appreciated

[Mike M]

Have you followed the documentation that came with the modem? Did you install
its drivers before connecting the modem?
--
Mike Maltby MS-MVP



loons > wrote:

> On tryingto load Wanadoo Broadband to my Packard
> Bell 'pulsar 20' I can only get as far as the
> message "Speedtouch network support driver not found "
> I am using the Speedtouch330 modem.
> Any ideas appreciated

[loons]

Done all that thanks,(a few times!!) still no sucess.
>-----Original Message-----
>Have you followed the documentation that came with the
modem? Did you install
>its drivers before connecting the modem?
>--
>Mike Maltby MS-MVP

>
>
>loons > wrote:
>
>> On tryingto load Wanadoo Broadband to my Packard
>> Bell 'pulsar 20' I can only get as far as the
>> message "Speedtouch network support driver not found "
>> I am using the Speedtouch330 modem.
>> Any ideas appreciated
>
>.
>

[Dan and Kate]

Broadband 'eh?

Generally, broadband requires a special modem, usually
provided by your ISP. This modem is then connected to a
router if you wish to hook up multiple systems in your
home. If this is indeed the case you need to contact your
ISP to resolve this issue. Again, Broadband means a
better than dialup connection, that is more than a 56k
connection, so requires a special modem. This modem then
either connects to a NIC card in your system or a router
then a NIC card in your systemS.

Dan


>-----Original Message-----
> On tryingto load Wanadoo Broadband to my Packard
>Bell 'pulsar 20' I can only get as far as the
>message "Speedtouch network support driver not found "
> I am using the Speedtouch330 modem.
> Any ideas appreciated
>.
>