defrag errors

[Jesse Hand]

When I try to run defrag it keeps restarting saying "hard disk changed" or
something to that affect. This is the first time it has done that. I have
turned off all running programs before running defrag but I still get the
error. Any ideas?

--

-Jesse

http://www.pixelpages.net/conservativemind

Disclaimer: Spelling & grammar errors are made on purpose for those who are
fulfilled by correcting others.

[Mart]

Either try running Defrag in Safe Mode and/or download and run ScanDefrag v
4.2a.

This is a FREE utility, written by several well respected contributors to
these News Groups and has been designed to run several original MS utilities
through a 'filter' which eliminates the usual junk which stops Defrag (and
Scandisk) from running properly in Normal Mode - as you are already
experiencing <g>

You can get ScanDefrag at either of the two sites below - and be sure to
read the associated notes for setting it up:
http://home.earthlink.net/~bblanton2/scandefrag/main.htm
http://www.blueorbsoft.com/scandefrag/index.html

HTH and good luck

Mart


"Jesse Hand" > wrote in message
...
> When I try to run defrag it keeps restarting saying "hard disk changed" or
> something to that affect. This is the first time it has done that. I have
> turned off all running programs before running defrag but I still get the
> error. Any ideas?
>
> --
>
> -Jesse
>
> http://www.pixelpages.net/conservativemind
>
> Disclaimer: Spelling & grammar errors are made on purpose for those who
are
> fulfilled by correcting others.
>
>
>

[Jesse Hand]

works great thanks!

--

-Jesse

http://www.pixelpages.net/conservativemind

Disclaimer: Spelling & grammar errors are made on purpose for those who are
fulfilled by correcting others.


"Mart" > wrote in message
...
> Either try running Defrag in Safe Mode and/or download and run ScanDefrag
v
> 4.2a.
>
> This is a FREE utility, written by several well respected contributors to
> these News Groups and has been designed to run several original MS
utilities
> through a 'filter' which eliminates the usual junk which stops Defrag (and
> Scandisk) from running properly in Normal Mode - as you are already
> experiencing <g>
>
> You can get ScanDefrag at either of the two sites below - and be sure to
> read the associated notes for setting it up:
> http://home.earthlink.net/~bblanton2/scandefrag/main.htm
> http://www.blueorbsoft.com/scandefrag/index.html
>
> HTH and good luck
>
> Mart
>
>
> "Jesse Hand" > wrote in message
> ...
> > When I try to run defrag it keeps restarting saying "hard disk changed"
or
> > something to that affect. This is the first time it has done that. I
have
> > turned off all running programs before running defrag but I still get
the
> > error. Any ideas?
> >
> > --
> >
> > -Jesse
> >
> > http://www.pixelpages.net/conservativemind
> >
> > Disclaimer: Spelling & grammar errors are made on purpose for those who
> are
> > fulfilled by correcting others.
> >
> >
> >
>
>

[Mart]

What works great? - Safe Mode and/or Scandefrag?

Glad you've now got it working, but it would be nice to know (as feedback
for others) which option works 'GREAT' <g>

Mart


"Jesse Hand" > wrote in message
...
> works great thanks!
>
> --
>
> -Jesse
>
> http://www.pixelpages.net/conservativemind
>
> Disclaimer: Spelling & grammar errors are made on purpose for those who
are
> fulfilled by correcting others.
>
>
> "Mart" > wrote in message
> ...
> > Either try running Defrag in Safe Mode and/or download and run
ScanDefrag
> v
> > 4.2a.
> >
> > This is a FREE utility, written by several well respected contributors
to
> > these News Groups and has been designed to run several original MS
> utilities
> > through a 'filter' which eliminates the usual junk which stops Defrag
(and
> > Scandisk) from running properly in Normal Mode - as you are already
> > experiencing <g>
> >
> > You can get ScanDefrag at either of the two sites below - and be sure to
> > read the associated notes for setting it up:
> > http://home.earthlink.net/~bblanton2/scandefrag/main.htm
> > http://www.blueorbsoft.com/scandefrag/index.html
> >
> > HTH and good luck
> >
> > Mart
> >
> >
> > "Jesse Hand" > wrote in message
> > ...
> > > When I try to run defrag it keeps restarting saying "hard disk
changed"
> or
> > > something to that affect. This is the first time it has done that. I
> have
> > > turned off all running programs before running defrag but I still get
> the
> > > error. Any ideas?
> > >
> > > --
> > >
> > > -Jesse
> > >
> > > http://www.pixelpages.net/conservativemind
> > >
> > > Disclaimer: Spelling & grammar errors are made on purpose for those
who
> > are
> > > fulfilled by correcting others.
> > >
> > >
> > >
> >
> >
>
>

[Jesse Hand]

Sorry about that. Scandefrag works great.

--

-Jesse

http://www.pixelpages.net/conservativemind

Disclaimer: Spelling & grammar errors are made on purpose for those who are
fulfilled by correcting others.


"Mart" > wrote in message
...
> What works great? - Safe Mode and/or Scandefrag?
>
> Glad you've now got it working, but it would be nice to know (as feedback
> for others) which option works 'GREAT' <g>
>
> Mart
>
>
> "Jesse Hand" > wrote in message
> ...
> > works great thanks!
> >
> > --
> >
> > -Jesse
> >
> > http://www.pixelpages.net/conservativemind
> >
> > Disclaimer: Spelling & grammar errors are made on purpose for those who
> are
> > fulfilled by correcting others.
> >
> >
> > "Mart" > wrote in message
> > ...
> > > Either try running Defrag in Safe Mode and/or download and run
> ScanDefrag
> > v
> > > 4.2a.
> > >
> > > This is a FREE utility, written by several well respected contributors
> to
> > > these News Groups and has been designed to run several original MS
> > utilities
> > > through a 'filter' which eliminates the usual junk which stops Defrag
> (and
> > > Scandisk) from running properly in Normal Mode - as you are already
> > > experiencing <g>
> > >
> > > You can get ScanDefrag at either of the two sites below - and be sure
to
> > > read the associated notes for setting it up:
> > > http://home.earthlink.net/~bblanton2/scandefrag/main.htm
> > > http://www.blueorbsoft.com/scandefrag/index.html
> > >
> > > HTH and good luck
> > >
> > > Mart
> > >
> > >
> > > "Jesse Hand" > wrote in message
> > > ...
> > > > When I try to run defrag it keeps restarting saying "hard disk
> changed"
> > or
> > > > something to that affect. This is the first time it has done that. I
> > have
> > > > turned off all running programs before running defrag but I still
get
> > the
> > > > error. Any ideas?
> > > >
> > > > --
> > > >
> > > > -Jesse
> > > >
> > > > http://www.pixelpages.net/conservativemind
> > > >
> > > > Disclaimer: Spelling & grammar errors are made on purpose for those
> who
> > > are
> > > > fulfilled by correcting others.
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Mart]

Thanks Jesse, your reply is appreciated.

Mart


"Jesse Hand" > wrote in message
...
> Sorry about that. Scandefrag works great.
>
> --
>
> -Jesse
>
> http://www.pixelpages.net/conservativemind
>
> Disclaimer: Spelling & grammar errors are made on purpose for those who
are
> fulfilled by correcting others.
>
>
> "Mart" > wrote in message
> ...
> > What works great? - Safe Mode and/or Scandefrag?
> >
> > Glad you've now got it working, but it would be nice to know (as
feedback
> > for others) which option works 'GREAT' <g>
> >
> > Mart
> >
> >
> > "Jesse Hand" > wrote in message
> > ...
> > > works great thanks!
> > >
> > > --
> > >
> > > -Jesse
> > >
> > > http://www.pixelpages.net/conservativemind
> > >
> > > Disclaimer: Spelling & grammar errors are made on purpose for those
who
> > are
> > > fulfilled by correcting others.
> > >
> > >
> > > "Mart" > wrote in message
> > > ...
> > > > Either try running Defrag in Safe Mode and/or download and run
> > ScanDefrag
> > > v
> > > > 4.2a.
> > > >
> > > > This is a FREE utility, written by several well respected
contributors
> > to
> > > > these News Groups and has been designed to run several original MS
> > > utilities
> > > > through a 'filter' which eliminates the usual junk which stops
Defrag
> > (and
> > > > Scandisk) from running properly in Normal Mode - as you are already
> > > > experiencing <g>
> > > >
> > > > You can get ScanDefrag at either of the two sites below - and be
sure
> to
> > > > read the associated notes for setting it up:
> > > > http://home.earthlink.net/~bblanton2/scandefrag/main.htm
> > > > http://www.blueorbsoft.com/scandefrag/index.html
> > > >
> > > > HTH and good luck
> > > >
> > > > Mart
> > > >
> > > >
> > > > "Jesse Hand" > wrote in message
> > > > ...
> > > > > When I try to run defrag it keeps restarting saying "hard disk
> > changed"
> > > or
> > > > > something to that affect. This is the first time it has done that.
I
> > > have
> > > > > turned off all running programs before running defrag but I still
> get
> > > the
> > > > > error. Any ideas?
> > > > >
> > > > > --
> > > > >
> > > > > -Jesse
> > > > >
> > > > > http://www.pixelpages.net/conservativemind
> > > > >
> > > > > Disclaimer: Spelling & grammar errors are made on purpose for
those
> > who
> > > > are
> > > > > fulfilled by correcting others.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>