Brad
May 25th 04, 12:24 PM
Hi,
I have a 750 Meg HDD which I would like to install in an old Compaq 386
PC with Dos 6.22. The 386 BIOS only "sees" 520M. If I put the HDD in one of
my newer PCs, using a Dos 6.22 boot floppy disk (with Fdisk & Format),
partition it into two logical drives, C: with about 520M, and D: with the
remainder, if I install that HDD in the 386, will I have any trouble
accessing both logical drives?
Thanks in advance, Brad
Before you type your password, credit card number, etc.,
be sure there is no active key logger (spyware) in your PC.
I have a 750 Meg HDD which I would like to install in an old Compaq 386
PC with Dos 6.22. The 386 BIOS only "sees" 520M. If I put the HDD in one of
my newer PCs, using a Dos 6.22 boot floppy disk (with Fdisk & Format),
partition it into two logical drives, C: with about 520M, and D: with the
remainder, if I install that HDD in the 386, will I have any trouble
accessing both logical drives?
Thanks in advance, Brad
Before you type your password, credit card number, etc.,
be sure there is no active key logger (spyware) in your PC.