Driove Not Found error

[Tom]

I recently upgraded my motherboard to gain an AGP socket;
and now Windows 98SE says it can't find the B: drive (it's
a 5.25" FDD) - although when I insert the Startup disk,
the DOS DOES find and access the drive just fine! Any I
deas? Someone suggested a BIOS upgrade, but with
Command.com able to use the drive, that doesn't seem
right - OTOH; if I bring up the DOS prompt FROM WINDOWS,
the drive is no longer accessible..........
All help on this would be appreciated.....
[and yes, the cables are all plugged in :)]

[Ron Badour]

If you have Tweak UI installed, make sure B: drive is marked on the My
Computer tab.

--
Regards

Ron Badour, MS MVP for W98
Tips: http://home.satx.rr.com/badour
Knowledge Base Info:
http://support.microsoft.com/default.aspx?pr=kbinfo

"Tom" > wrote in message
...
> I recently upgraded my motherboard to gain an AGP socket;
> and now Windows 98SE says it can't find the B: drive (it's
> a 5.25" FDD) - although when I insert the Startup disk,
> the DOS DOES find and access the drive just fine! Any I
> deas? Someone suggested a BIOS upgrade, but with
> Command.com able to use the drive, that doesn't seem
> right - OTOH; if I bring up the DOS prompt FROM WINDOWS,
> the drive is no longer accessible..........
> All help on this would be appreciated.....
> [and yes, the cables are all plugged in :)]