Networking Problem

[Russell]

When I start the computer it comes up with the following
message"The following error occured while loading protocol
number 0, error 254. Any ideas how to get this fixed. I
cannot print to my computer in my office from the front
office but I can connect from my office computer to the
front office.
thanks for your help
Russell

[MB]

Sounds to me like you have more than one computer with
the same name. Change the computer's assigned name in
network neighborhood properties and that should fix the
error you receive during boot-up. However, not sure this
will fix the other problems mentioned with connectivity
or printing. I require more info to help with those
situations.

MB
>-----Original Message-----
>When I start the computer it comes up with the following
>message"The following error occured while loading
protocol
>number 0, error 254. Any ideas how to get this fixed. I
>cannot print to my computer in my office from the front
>office but I can connect from my office computer to the
>front office.
>thanks for your help
>Russell
>.
>

[Richard G. Harper]

Does this apply?

http://www.wown.com/j_helmig/ipxer254.htm

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"Russell" > wrote in message
...
> When I start the computer it comes up with the following
> message"The following error occured while loading protocol
> number 0, error 254. Any ideas how to get this fixed. I
> cannot print to my computer in my office from the front
> office but I can connect from my office computer to the
> front office.
> thanks for your help
> Russell

[rUSSELL]

Richard, thanks for your help, that fixes my problem.
Rusell
>-----Original Message-----
>Does this apply?
>
>http://www.wown.com/j_helmig/ipxer254.htm
>
>--
>Richard G. Harper [MVP Win9x]
>* PLEASE post all messages and replies in the newsgroups
>* for the benefit of all. Private mail is usually not
replied to.
>* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
>
>
>"Russell" > wrote in message
...
>> When I start the computer it comes up with the following
>> message"The following error occured while loading
protocol
>> number 0, error 254. Any ideas how to get this fixed. I
>> cannot print to my computer in my office from the front
>> office but I can connect from my office computer to the
>> front office.
>> thanks for your help
>> Russell
>
>
>.
>

[Richard G. Harper]

Glad I was able to help.

--
Richard G. Harper [MVP Win9x]
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm


"rUSSELL" > wrote in message
...
> Richard, thanks for your help, that fixes my problem.
> Rusell
> >-----Original Message-----
> >Does this apply?
> >
> >http://www.wown.com/j_helmig/ipxer254.htm
> >
> >--
> >Richard G. Harper [MVP Win9x]
> >* PLEASE post all messages and replies in the newsgroups
> >* for the benefit of all. Private mail is usually not
> replied to.
> >* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
> >
> >
> >"Russell" > wrote in message
> ...
> >> When I start the computer it comes up with the following
> >> message"The following error occured while loading
> protocol
> >> number 0, error 254. Any ideas how to get this fixed. I
> >> cannot print to my computer in my office from the front
> >> office but I can connect from my office computer to the
> >> front office.
> >> thanks for your help
> >> Russell
> >
> >
> >.
> >