Existing NDIS2 problem

[SapphireBlue]

Hello,

I have browsed the messages already posted and did not see an answer, so
here is my problem:

I have two computers, one running XP and one running Win98SE. I have them
connected to a router with a cable connection. I have had this setup for a
few years now and it has worked flawlessly. Recently I disconnected the
router from one of the computers. I reconnected it last week and while the
router says it is communicating with both computers, the sub connection
(Win98SE computer) cannot access the Internet.
I checked Device Manager and the Existing NDIS2 has an exclamation point
next to it. Last week I was able to use my Windows CD to reinstall this and
it worked fine. Now, no matter what I do it will not remove the exclamation
point and I still cannot connect to the Internet with that computer.

I have tried using my Win98SE Cd, I have tried using CABS, I have tried
removing it and reinstalling it every way, but nothing seems to work. I also
made another setup disk from my computer (XP) and ran that, but it didn't
fix it either. Is there somewhere to download a more current driver for
this?

Any help or direction will be greatly appreciated.

SapphireBlue (o:

[Gerry Voras]

The NDIS driver is a driver that Win9x uses during upgrades when it can't
figure out what the device actually is, and thus can't figure out what the
proper driver needed is. Delete this entry, then try installing the proper
driver for your hardware.

"SapphireBlue" <SapphireBlue(at)anywhere.invalid> wrote in message
...
> Hello,
>
> I have browsed the messages already posted and did not see an answer, so
> here is my problem:
>
> I have two computers, one running XP and one running Win98SE. I have them
> connected to a router with a cable connection. I have had this setup for a
> few years now and it has worked flawlessly. Recently I disconnected the
> router from one of the computers. I reconnected it last week and while the
> router says it is communicating with both computers, the sub connection
> (Win98SE computer) cannot access the Internet.
> I checked Device Manager and the Existing NDIS2 has an exclamation point
> next to it. Last week I was able to use my Windows CD to reinstall this
and
> it worked fine. Now, no matter what I do it will not remove the
exclamation
> point and I still cannot connect to the Internet with that computer.
>
> I have tried using my Win98SE Cd, I have tried using CABS, I have tried
> removing it and reinstalling it every way, but nothing seems to work. I
also
> made another setup disk from my computer (XP) and ran that, but it didn't
> fix it either. Is there somewhere to download a more current driver for
> this?
>
> Any help or direction will be greatly appreciated.
>
> SapphireBlue (o:
>
>