Robert L.
June 4th 04, 10:44 PM
Please, read ORIGINAL message and reply...
I tried that, I even discovered that IP had disappeared in
the multiples trials... Re-instated it. Log Off
indicates "Log-off Admin", so this is not the problem.
Now, I face the decision to buy another network adapter...
This one might have blowned, I don't know... I'm out of
ideas. Any other ideas anyone ?
ORIGINAL MESSAGE AND REPLY :
In article <1757101c44904$8664db30
>, "Robert L"
> wrote:
>I have a home LAN with 5 PCs through router through ADSL
>modem. Everything work fine exept for one 98SE PC on
>which I did a clean reinstall of WIN 98SE (no Windows
>update possible as long as I can't get it back on
>network, then back online...
>
>I followed exactely all my network configuration (again,
>everything else work fine : XP, 95, 98SE machines all
>seeing each others, exept this 98se - let's call it BUTCH.
>
>BUTCH was working fine too prior to 98SE reinstall (on
>cleaned and reformatted C: drive)
>
>Card : 3Com509B
>Router : D-link DI-704P
>
>I followed everything I could find. At the best, BUTCH
>saw himself and the other 98SE machine - although it
>could not browse on the other 98se. Then, back to see
>himself only...
>
>I did exactely the same configuration as the other 98se
>machine. I tried another cable, tried another network
>wall plug in the house, brought it back directly in the
>router downstairs : there's no way apparently I can get
>it back on the network, nor to the web (which probably
>require it to work on the network first, as every PC go
>through the router).
>
>I removed protocols, reinstalled them. I have everything
>set :
>Client for MS Networks
>Network card
>TCP/IP configured as required
>IPX/SPX
>File and Printer Sharing for MS Networks
>
>I tried to ADD NetBEUI and removed it as it did not solve
>anything.
>
>I must say that the first setup I did after reinstalling
>had a mistake in the third section of IP adress : I had
>forgotten that every other PC as well as the Router had
>a "0", and I had a "1" so I replaced it, and YES it is
>now a "0" (unless you tell me the Register or something
>working in some esoteric field may have kept a "1" ???...
>
>Any idea ? This is a desperate case... I was thinking of
>starting everything from scratch or even installing Win
>XP (this is a PII 350, possibly too slow for it...)
>
>Thanks
>
>Robert L.
The minimum recommended speed for Win XP 300 MHz. It
shouldn't be
necessary, and it might not help (e.g. if there's a
hardware problem)
to install XP.
NetBEUI and IPX/SPX have nothing to do with Internet
access. Using
more than one protocol can make network browsing
unreliable. For best
results, use TCP/IP as the only network protocol on all
computers.
You must log on to enable network browsing. Click Start
and look at
the "Log off" entry in the menu. It should say "Log Off
<username>".
If is just says "Log Off", that's the problem. A likely
fix is to
open the registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersio
n\
Network\Real Mode Net
and delete the value named "AutoLogon".
Compare the TCP/IP settings to those on another computer.
They should
show the same values for subnet mask, default gateway, and
DHCP
server. Their IP addresses should be in the same subnet.
Try pinging other computers by IP address and by name.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news
group
for everyone to see. I'm sorry, but I don't answer
questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm
..
I tried that, I even discovered that IP had disappeared in
the multiples trials... Re-instated it. Log Off
indicates "Log-off Admin", so this is not the problem.
Now, I face the decision to buy another network adapter...
This one might have blowned, I don't know... I'm out of
ideas. Any other ideas anyone ?
ORIGINAL MESSAGE AND REPLY :
In article <1757101c44904$8664db30
>, "Robert L"
> wrote:
>I have a home LAN with 5 PCs through router through ADSL
>modem. Everything work fine exept for one 98SE PC on
>which I did a clean reinstall of WIN 98SE (no Windows
>update possible as long as I can't get it back on
>network, then back online...
>
>I followed exactely all my network configuration (again,
>everything else work fine : XP, 95, 98SE machines all
>seeing each others, exept this 98se - let's call it BUTCH.
>
>BUTCH was working fine too prior to 98SE reinstall (on
>cleaned and reformatted C: drive)
>
>Card : 3Com509B
>Router : D-link DI-704P
>
>I followed everything I could find. At the best, BUTCH
>saw himself and the other 98SE machine - although it
>could not browse on the other 98se. Then, back to see
>himself only...
>
>I did exactely the same configuration as the other 98se
>machine. I tried another cable, tried another network
>wall plug in the house, brought it back directly in the
>router downstairs : there's no way apparently I can get
>it back on the network, nor to the web (which probably
>require it to work on the network first, as every PC go
>through the router).
>
>I removed protocols, reinstalled them. I have everything
>set :
>Client for MS Networks
>Network card
>TCP/IP configured as required
>IPX/SPX
>File and Printer Sharing for MS Networks
>
>I tried to ADD NetBEUI and removed it as it did not solve
>anything.
>
>I must say that the first setup I did after reinstalling
>had a mistake in the third section of IP adress : I had
>forgotten that every other PC as well as the Router had
>a "0", and I had a "1" so I replaced it, and YES it is
>now a "0" (unless you tell me the Register or something
>working in some esoteric field may have kept a "1" ???...
>
>Any idea ? This is a desperate case... I was thinking of
>starting everything from scratch or even installing Win
>XP (this is a PII 350, possibly too slow for it...)
>
>Thanks
>
>Robert L.
The minimum recommended speed for Win XP 300 MHz. It
shouldn't be
necessary, and it might not help (e.g. if there's a
hardware problem)
to install XP.
NetBEUI and IPX/SPX have nothing to do with Internet
access. Using
more than one protocol can make network browsing
unreliable. For best
results, use TCP/IP as the only network protocol on all
computers.
You must log on to enable network browsing. Click Start
and look at
the "Log off" entry in the menu. It should say "Log Off
<username>".
If is just says "Log Off", that's the problem. A likely
fix is to
open the registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersio
n\
Network\Real Mode Net
and delete the value named "AutoLogon".
Compare the TCP/IP settings to those on another computer.
They should
show the same values for subnet mask, default gateway, and
DHCP
server. Their IP addresses should be in the same subnet.
Try pinging other computers by IP address and by name.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news
group
for everyone to see. I'm sorry, but I don't answer
questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com
Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm
..