JDP
June 4th 04, 09:44 PM
Whenever I plug in a USB Device I get the following error
message:
Fatal Exception error 0E at 0028:ff029146 in VXD USBHUB
(05) 00000A26
I Have:
Cleaned up the device manager by removing any duplicate
entries,
Ran the INTEL USB check utility that indicates the usb in
working properly
Reinstalled the USB drivers using the latest driver
information form Intel,
Removed all usb devices and let the system reinstall them,
Verified I have the most recent version of the bios
Turned on Plug and Play in the bios,
Turned off Power management in the bios
Turned on USB Keyboard in the bios
Can't find USB Legacy support in the bios
Verified that the IRQ Steering is properly installed
Tried to set the Assign IRQ's to auto or system in the
bios but the bios on the toshiba does not provide this
setting.
Please help if possible. This is driving me nuts!!
message:
Fatal Exception error 0E at 0028:ff029146 in VXD USBHUB
(05) 00000A26
I Have:
Cleaned up the device manager by removing any duplicate
entries,
Ran the INTEL USB check utility that indicates the usb in
working properly
Reinstalled the USB drivers using the latest driver
information form Intel,
Removed all usb devices and let the system reinstall them,
Verified I have the most recent version of the bios
Turned on Plug and Play in the bios,
Turned off Power management in the bios
Turned on USB Keyboard in the bios
Can't find USB Legacy support in the bios
Verified that the IRQ Steering is properly installed
Tried to set the Assign IRQ's to auto or system in the
bios but the bios on the toshiba does not provide this
setting.
Please help if possible. This is driving me nuts!!