Stephen Horrillo
March 23rd 05, 03:16 PM
On 23-Mar-2005, "Jack E Martinelli" > wrote:
> Confirm that the jumpers on the two drives correspond with the cabling
> positions.
> I recommend obtaining a second cable and configuring the HD to be the
> Master
> on the first IDE channel, with the CR-RW the Master on the second channel,
> to maximize performance.
> Be sure to confirm that the order of booting from the devices is as
> desired
> in the BIOS setup program.
I'm sorry I meant that I'm trying to install a CD-RW drive.
--
Warmest regards,
Stephen Horrillo, Realtor / C.Ht.
For MLS & Computer Training: http://www.BrokerAgentTraining.com
Realtors Earn Over 100% at EXIT: http://www.over100percent.com
> Confirm that the jumpers on the two drives correspond with the cabling
> positions.
> I recommend obtaining a second cable and configuring the HD to be the
> Master
> on the first IDE channel, with the CR-RW the Master on the second channel,
> to maximize performance.
> Be sure to confirm that the order of booting from the devices is as
> desired
> in the BIOS setup program.
I'm sorry I meant that I'm trying to install a CD-RW drive.
--
Warmest regards,
Stephen Horrillo, Realtor / C.Ht.
For MLS & Computer Training: http://www.BrokerAgentTraining.com
Realtors Earn Over 100% at EXIT: http://www.over100percent.com