ME ps2 mouse wont work after a while

[jim]

ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a
while the mouse hang. Any idea what causes these. Since we mouse cant move,
how can I go to see the 'IRQ'. It will work ok upon reboot but the problem
will appear again.(ME besides the usual driver for the graphic card, modem,
it only have the DSL driver install.)Many thanks

[Noel Paton]

check it out in Safe Mode - open Device Manager there, and look for
duplicated or redundant entries - remove ALL instances, and reboot to Normal
Mode - Windows will reinstall drivers required

--
Noel Paton (MS-MVP 2002-2005, Windows)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm
http://tinyurl.com/6oztj
A Happy Xmas, and a Merry New Year to everyone!

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"jim" > wrote in message
...
> ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after
> a
> while the mouse hang. Any idea what causes these. Since we mouse cant
> move,
> how can I go to see the 'IRQ'. It will work ok upon reboot but the problem
> will appear again.(ME besides the usual driver for the graphic card,
> modem,
> it only have the DSL driver install.)Many thanks

[Jack E Martinelli]

Begin by testing with a known-good second mouse. If it works fine, examine
the original mouse cord, esp., where it enters the mouse, for damage.
Wiggle the cord while the mouse works fine, attempting to screw it up. If
it is defective, replace it. And confirm that the connector seats firmly
into the port on the back of the box.
--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm

http://www.microsoft.com/athome/security/protect/default.aspx
Your cooperation is very appreciated.
------
"jim" > wrote in message
...
> ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after
a
> while the mouse hang. Any idea what causes these. Since we mouse cant
move,
> how can I go to see the 'IRQ'. It will work ok upon reboot but the problem
> will appear again.(ME besides the usual driver for the graphic card,
modem,
> it only have the DSL driver install.)Many thanks

[jim]

Noel and Jack,

Shy to say, how do I get to safe mode in ME. Press F8 to no effect. Change
the ps2 mouse, no improvement. Sometimes when switch on pc, its already hang,
sometimes it works and then gets stuck. Sometimes, a slight movement of the
mouse will give you a dialogue page (an action as if you right click the
desktop). Sometimes it seems to work ok until I shut down the pc. (This is
the same senario when using the 'old' mouse).

Looking into the sys info, under component its has a problem device
ACPI\PNPOCOF\... error code 22

Under H/W resource, ACPI IRQ for PCI IRQ steering is IRQ 9 and IRQ 11.
Hope this will assist, many thanks

"jim" wrote:

> ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a
> while the mouse hang. Any idea what causes these. Since we mouse cant move,
> how can I go to see the 'IRQ'. It will work ok upon reboot but the problem
> will appear again.(ME besides the usual driver for the graphic card, modem,
> it only have the DSL driver install.)Many thanks

[Mart]

To boot into safe mode?

Holding down or 'stabbing at' the F8 or Ctrl are the 'Official' methods, but
you do need to try these keys IMMEDIATELY you power up your PC and keep
'stabbing' at them. You may even need to keep them pressed throughout the
boot process. You could also try using the Shift key (see above conditions).

Another alternative is when your machine is running in Normal Mode, run
msconfig.exe and on the General tab, select Advanced and check the 'Enable
Startup Menu' box.
Don't forget to uncheck the box when you've finished with it <g>

Mart


"jim" > wrote in message
...
> Noel and Jack,
>
> Shy to say, how do I get to safe mode in ME. Press F8 to no effect. Change
> the ps2 mouse, no improvement. Sometimes when switch on pc, its already
> hang,
> sometimes it works and then gets stuck. Sometimes, a slight movement of
> the
> mouse will give you a dialogue page (an action as if you right click the
> desktop). Sometimes it seems to work ok until I shut down the pc. (This is
> the same senario when using the 'old' mouse).
>
> Looking into the sys info, under component its has a problem device
> ACPI\PNPOCOF\... error code 22
>
> Under H/W resource, ACPI IRQ for PCI IRQ steering is IRQ 9 and IRQ 11.
> Hope this will assist, many thanks
>
> "jim" wrote:
>
>> ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
>> after a
>> while the mouse hang. Any idea what causes these. Since we mouse cant
>> move,
>> how can I go to see the 'IRQ'. It will work ok upon reboot but the
>> problem
>> will appear again.(ME besides the usual driver for the graphic card,
>> modem,
>> it only have the DSL driver install.)Many thanks

[jim]

When I go to Msconfig/Advance, and check start up menu, the menu aappears
but the kb does not response to my choice. What can I do?

"jim" wrote:

> ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a
> while the mouse hang. Any idea what causes these. Since we mouse cant move,
> how can I go to see the 'IRQ'. It will work ok upon reboot but the problem
> will appear again.(ME besides the usual driver for the graphic card, modem,
> it only have the DSL driver install.)Many thanks

[Jack E Martinelli]

Aha!
Test with a new known-good keyboard.
The bad one may be interfering with the mouse.

And your Error Code 22 is irrelevant:

"Error Code 22:
See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device
Entry
in System Information Tool" (http://support.microsoft.com?kbid=272291) where
you will find it stated that what you are seeing is "by design".

This problem is often the result of having changed the layout of your PCI
cards or following the removal of a card. Forget about this "error" as it
is
unlikely to have an effect and is simply indicating that the place holder
previously used is no longer required.
--
Mike Maltby MS-MVP Sept 2003
--------

And clean up any duplicate mice, in the manner that Mart and Noel have
advised.

--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm

http://www.microsoft.com/athome/security/protect/default.aspx
Your cooperation is very appreciated.
------
"jim" > wrote in message
...
> When I go to Msconfig/Advance, and check start up menu, the menu aappears
> but the kb does not response to my choice. What can I do?
>
> "jim" wrote:
>
> > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
after a
> > while the mouse hang. Any idea what causes these. Since we mouse cant
move,
> > how can I go to see the 'IRQ'. It will work ok upon reboot but the
problem
> > will appear again.(ME besides the usual driver for the graphic card,
modem,
> > it only have the DSL driver install.)Many thanks

[jim]

Noel and Jack,

Change the kb so the pc now have a 'working' mouse and a 'working' kb.

1st B - looks good, launch IE (fr TBar), launch IE (fr DTop), then go to Sys
Info, write a docs, all looks good ..........jolly .... !!!! so shut down by
closing all the applications 1 by 1. (still getting the message "Installation
failed .. which I post under windows update, ME - Installation failed ...
whengoing to sys info part)

2nd B - mouse hang (have not done anything yet)
3rd B - same as 2nd
4th B - mouse working, launch IE(Tb), looks good and shut down
5th B - same as 4th but also launch IE(DT) and looks good and shut down
6th B - Mouse hang
7th B - Mouse hang
8th B - back to life as 1st Boot, hurray !!!!!

so I shall complete the sentence now .... looks jolly good !!!

Next try on F8
9th B - missed the F8
10th B - Oh "YES .... yes ......."
and give the start-up menu but kb does not response to my choice. so
power off.
11th B - missed the F8 but the mouse hang
12th B - just let it boot up and the mouse seems working without launching
any IE . but hang on as I am tying this a slight movement of the mouse seems
to drag a box and cant change its direction, it only get bigger and bigger if
you try to use the mouse

This is serious stuff and I am not kidding on NY day.
So hows that for the NY mystery..... and I will keep you posted, Meantime
just dont know who is going to win, man or the beast (pc).......my god .....

Just press ALT/DEL to shut down the pc.............. man


"Jack E Martinelli" wrote:

> Aha!
> Test with a new known-good keyboard.
> The bad one may be interfering with the mouse.
>
> And your Error Code 22 is irrelevant:
>
> "Error Code 22:
> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device
> Entry
> in System Information Tool" (http://support.microsoft.com?kbid=272291) where
> you will find it stated that what you are seeing is "by design".
>
> This problem is often the result of having changed the layout of your PCI
> cards or following the removal of a card. Forget about this "error" as it
> is
> unlikely to have an effect and is simply indicating that the place holder
> previously used is no longer required.
> --
> Mike Maltby MS-MVP Sept 2003
> --------
>
> And clean up any duplicate mice, in the manner that Mart and Noel have
> advised.
>
> --
> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> Help us help you: http://www.dts-L.org/goodpost.htm
>
> http://www.microsoft.com/athome/security/protect/default.aspx
> Your cooperation is very appreciated.
> ------
> "jim" > wrote in message
> ...
> > When I go to Msconfig/Advance, and check start up menu, the menu aappears
> > but the kb does not response to my choice. What can I do?
> >
> > "jim" wrote:
> >
> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
> after a
> > > while the mouse hang. Any idea what causes these. Since we mouse cant
> move,
> > > how can I go to see the 'IRQ'. It will work ok upon reboot but the
> problem
> > > will appear again.(ME besides the usual driver for the graphic card,
> modem,
> > > it only have the DSL driver install.)Many thanks
>
>
>

[jim]

Trying to F8 and hitting continously, and now showing 'previous resume fr
hibernate failed. would u like to try again (Y/N)?" The kb does not response,
Tsunami strike // what shall I do next, pls help, thanks

"Jack E Martinelli" wrote:

> Aha!
> Test with a new known-good keyboard.
> The bad one may be interfering with the mouse.
>
> And your Error Code 22 is irrelevant:
>
> "Error Code 22:
> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device
> Entry
> in System Information Tool" (http://support.microsoft.com?kbid=272291) where
> you will find it stated that what you are seeing is "by design".
>
> This problem is often the result of having changed the layout of your PCI
> cards or following the removal of a card. Forget about this "error" as it
> is
> unlikely to have an effect and is simply indicating that the place holder
> previously used is no longer required.
> --
> Mike Maltby MS-MVP Sept 2003
> --------
>
> And clean up any duplicate mice, in the manner that Mart and Noel have
> advised.
>
> --
> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> Help us help you: http://www.dts-L.org/goodpost.htm
>
> http://www.microsoft.com/athome/security/protect/default.aspx
> Your cooperation is very appreciated.
> ------
> "jim" > wrote in message
> ...
> > When I go to Msconfig/Advance, and check start up menu, the menu aappears
> > but the kb does not response to my choice. What can I do?
> >
> > "jim" wrote:
> >
> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
> after a
> > > while the mouse hang. Any idea what causes these. Since we mouse cant
> move,
> > > how can I go to see the 'IRQ'. It will work ok upon reboot but the
> problem
> > > will appear again.(ME besides the usual driver for the graphic card,
> modem,
> > > it only have the DSL driver install.)Many thanks
>
>
>

[Noel Paton]

This is a PS/2 KB, right?
If so, then I fear you may have motherboard problems.
Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible to
'Enable Legacy USB Support'


--
Noel Paton (MS-MVP 2002-2005, Windows)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm
http://tinyurl.com/6oztj
A Happy Xmas, and a Merry New Year to everyone!

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"jim" > wrote in message
...
> Trying to F8 and hitting continously, and now showing 'previous resume fr
> hibernate failed. would u like to try again (Y/N)?" The kb does not
> response,
> Tsunami strike // what shall I do next, pls help, thanks
>
> "Jack E Martinelli" wrote:
>
>> Aha!
>> Test with a new known-good keyboard.
>> The bad one may be interfering with the mouse.
>>
>> And your Error Code 22 is irrelevant:
>>
>> "Error Code 22:
>> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device
>> Entry
>> in System Information Tool" (http://support.microsoft.com?kbid=272291)
>> where
>> you will find it stated that what you are seeing is "by design".
>>
>> This problem is often the result of having changed the layout of your PCI
>> cards or following the removal of a card. Forget about this "error" as
>> it
>> is
>> unlikely to have an effect and is simply indicating that the place holder
>> previously used is no longer required.
>> --
>> Mike Maltby MS-MVP Sept 2003
>> --------
>>
>> And clean up any duplicate mice, in the manner that Mart and Noel have
>> advised.
>>
>> --
>> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
>> Help us help you: http://www.dts-L.org/goodpost.htm
>>
>> http://www.microsoft.com/athome/security/protect/default.aspx
>> Your cooperation is very appreciated.
>> ------
>> "jim" > wrote in message
>> ...
>> > When I go to Msconfig/Advance, and check start up menu, the menu
>> > aappears
>> > but the kb does not response to my choice. What can I do?
>> >
>> > "jim" wrote:
>> >
>> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
>> after a
>> > > while the mouse hang. Any idea what causes these. Since we mouse cant
>> move,
>> > > how can I go to see the 'IRQ'. It will work ok upon reboot but the
>> problem
>> > > will appear again.(ME besides the usual driver for the graphic card,
>> modem,
>> > > it only have the DSL driver install.)Many thanks
>>
>>
>>

[jim]

ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked the
Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now
response and able to get to the desktop.

will see how the mouse behave and try the F8 thing later. Need to be able to
get the 'Window Updates' to obtain the latest patches and hope it can be
resolve. Will post this progress in the other column "Windows Update/windows
update general.

Noel, Mart and Jack, many thanks for all your help.ts a great relief for now
while I try to get the pc working in the way in which its suppose to work,
thanks again.

"Noel Paton" wrote:

> This is a PS/2 KB, right?
> If so, then I fear you may have motherboard problems.
> Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible to
> 'Enable Legacy USB Support'
>
>
> --
> Noel Paton (MS-MVP 2002-2005, Windows)
>
> Nil Carborundum Illegitemi
> http://www.btinternet.com/~winnoel/millsrpch.htm
> http://tinyurl.com/6oztj
> A Happy Xmas, and a Merry New Year to everyone!
>
> Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
>
> "jim" > wrote in message
> ...
> > Trying to F8 and hitting continously, and now showing 'previous resume fr
> > hibernate failed. would u like to try again (Y/N)?" The kb does not
> > response,
> > Tsunami strike // what shall I do next, pls help, thanks
> >
> > "Jack E Martinelli" wrote:
> >
> >> Aha!
> >> Test with a new known-good keyboard.
> >> The bad one may be interfering with the mouse.
> >>
> >> And your Error Code 22 is irrelevant:
> >>
> >> "Error Code 22:
> >> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device
> >> Entry
> >> in System Information Tool" (http://support.microsoft.com?kbid=272291)
> >> where
> >> you will find it stated that what you are seeing is "by design".
> >>
> >> This problem is often the result of having changed the layout of your PCI
> >> cards or following the removal of a card. Forget about this "error" as
> >> it
> >> is
> >> unlikely to have an effect and is simply indicating that the place holder
> >> previously used is no longer required.
> >> --
> >> Mike Maltby MS-MVP Sept 2003
> >> --------
> >>
> >> And clean up any duplicate mice, in the manner that Mart and Noel have
> >> advised.
> >>
> >> --
> >> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> >> Help us help you: http://www.dts-L.org/goodpost.htm
> >>
> >> http://www.microsoft.com/athome/security/protect/default.aspx
> >> Your cooperation is very appreciated.
> >> ------
> >> "jim" > wrote in message
> >> ...
> >> > When I go to Msconfig/Advance, and check start up menu, the menu
> >> > aappears
> >> > but the kb does not response to my choice. What can I do?
> >> >
> >> > "jim" wrote:
> >> >
> >> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but
> >> after a
> >> > > while the mouse hang. Any idea what causes these. Since we mouse cant
> >> move,
> >> > > how can I go to see the 'IRQ'. It will work ok upon reboot but the
> >> problem
> >> > > will appear again.(ME besides the usual driver for the graphic card,
> >> modem,
> >> > > it only have the DSL driver install.)Many thanks
> >>
> >>
> >>
>
>
>

[Jack E Martinelli]

Glad to see you appear to be having some success.
Please keep us informed.
--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm

http://www.microsoft.com/athome/security/protect/default.aspx
Your cooperation is very appreciated.
------
"jim" > wrote in message
...
> ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked
the
> Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now
> response and able to get to the desktop.
>
> will see how the mouse behave and try the F8 thing later. Need to be able
to
> get the 'Window Updates' to obtain the latest patches and hope it can be
> resolve. Will post this progress in the other column "Windows
Update/windows
> update general.
>
> Noel, Mart and Jack, many thanks for all your help.ts a great relief for
now
> while I try to get the pc working in the way in which its suppose to work,
> thanks again.
>
> "Noel Paton" wrote:
>
> > This is a PS/2 KB, right?
> > If so, then I fear you may have motherboard problems.
> > Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible
to
> > 'Enable Legacy USB Support'
> >
> >
> > --
> > Noel Paton (MS-MVP 2002-2005, Windows)
> >
> > Nil Carborundum Illegitemi
> > http://www.btinternet.com/~winnoel/millsrpch.htm
> > http://tinyurl.com/6oztj
> > A Happy Xmas, and a Merry New Year to everyone!
> >
> > Please read http://dts-l.org/goodpost.htm on how to post messages to
NG's
> >
> > "jim" > wrote in message
> > ...
> > > Trying to F8 and hitting continously, and now showing 'previous resume
fr
> > > hibernate failed. would u like to try again (Y/N)?" The kb does not
> > > response,
> > > Tsunami strike // what shall I do next, pls help, thanks
> > >
> > > "Jack E Martinelli" wrote:
> > >
> > >> Aha!
> > >> Test with a new known-good keyboard.
> > >> The bad one may be interfering with the mouse.
> > >>
> > >> And your Error Code 22 is irrelevant:
> > >>
> > >> "Error Code 22:
> > >> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem
Device
> > >> Entry
> > >> in System Information Tool"
(http://support.microsoft.com?kbid=272291)
> > >> where
> > >> you will find it stated that what you are seeing is "by design".
> > >>
> > >> This problem is often the result of having changed the layout of your
PCI
> > >> cards or following the removal of a card. Forget about this "error"
as
> > >> it
> > >> is
> > >> unlikely to have an effect and is simply indicating that the place
holder
> > >> previously used is no longer required.
> > >> --
> > >> Mike Maltby MS-MVP Sept 2003
> > >> --------
> > >>
> > >> And clean up any duplicate mice, in the manner that Mart and Noel
have
> > >> advised.
> > >>
> > >> --
> > >> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> > >> Help us help you: http://www.dts-L.org/goodpost.htm
> > >>
> > >> http://www.microsoft.com/athome/security/protect/default.aspx
> > >> Your cooperation is very appreciated.
> > >> ------
> > >> "jim" > wrote in message
> > >> ...
> > >> > When I go to Msconfig/Advance, and check start up menu, the menu
> > >> > aappears
> > >> > but the kb does not response to my choice. What can I do?
> > >> >
> > >> > "jim" wrote:
> > >> >
> > >> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning
but
> > >> after a
> > >> > > while the mouse hang. Any idea what causes these. Since we mouse
cant
> > >> move,
> > >> > > how can I go to see the 'IRQ'. It will work ok upon reboot but
the
> > >> problem
> > >> > > will appear again.(ME besides the usual driver for the graphic
card,
> > >> modem,
> > >> > > it only have the DSL driver install.)Many thanks
> > >>
> > >>
> > >>
> >
> >
> >

[jim]

The mouse did not behave herself. By moving it, the window sometimes re-size
itself. Need to test a bit more. Many thanks

"Jack E Martinelli" wrote:

> Glad to see you appear to be having some success.
> Please keep us informed.
> --
> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> Help us help you: http://www.dts-L.org/goodpost.htm
>
> http://www.microsoft.com/athome/security/protect/default.aspx
> Your cooperation is very appreciated.
> ------
> "jim" > wrote in message
> ...
> > ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked
> the
> > Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now
> > response and able to get to the desktop.
> >
> > will see how the mouse behave and try the F8 thing later. Need to be able
> to
> > get the 'Window Updates' to obtain the latest patches and hope it can be
> > resolve. Will post this progress in the other column "Windows
> Update/windows
> > update general.
> >
> > Noel, Mart and Jack, many thanks for all your help.ts a great relief for
> now
> > while I try to get the pc working in the way in which its suppose to work,
> > thanks again.
> >
> > "Noel Paton" wrote:
> >
> > > This is a PS/2 KB, right?
> > > If so, then I fear you may have motherboard problems.
> > > Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible
> to
> > > 'Enable Legacy USB Support'
> > >
> > >
> > > --
> > > Noel Paton (MS-MVP 2002-2005, Windows)
> > >
> > > Nil Carborundum Illegitemi
> > > http://www.btinternet.com/~winnoel/millsrpch.htm
> > > http://tinyurl.com/6oztj
> > > A Happy Xmas, and a Merry New Year to everyone!
> > >
> > > Please read http://dts-l.org/goodpost.htm on how to post messages to
> NG's
> > >
> > > "jim" > wrote in message
> > > ...
> > > > Trying to F8 and hitting continously, and now showing 'previous resume
> fr
> > > > hibernate failed. would u like to try again (Y/N)?" The kb does not
> > > > response,
> > > > Tsunami strike // what shall I do next, pls help, thanks
> > > >
> > > > "Jack E Martinelli" wrote:
> > > >
> > > >> Aha!
> > > >> Test with a new known-good keyboard.
> > > >> The bad one may be interfering with the mouse.
> > > >>
> > > >> And your Error Code 22 is irrelevant:
> > > >>
> > > >> "Error Code 22:
> > > >> See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem
> Device
> > > >> Entry
> > > >> in System Information Tool"
> (http://support.microsoft.com?kbid=272291)
> > > >> where
> > > >> you will find it stated that what you are seeing is "by design".
> > > >>
> > > >> This problem is often the result of having changed the layout of your
> PCI
> > > >> cards or following the removal of a card. Forget about this "error"
> as
> > > >> it
> > > >> is
> > > >> unlikely to have an effect and is simply indicating that the place
> holder
> > > >> previously used is no longer required.
> > > >> --
> > > >> Mike Maltby MS-MVP Sept 2003
> > > >> --------
> > > >>
> > > >> And clean up any duplicate mice, in the manner that Mart and Noel
> have
> > > >> advised.
> > > >>
> > > >> --
> > > >> Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
> > > >> Help us help you: http://www.dts-L.org/goodpost.htm
> > > >>
> > > >> http://www.microsoft.com/athome/security/protect/default.aspx
> > > >> Your cooperation is very appreciated.
> > > >> ------
> > > >> "jim" > wrote in message
> > > >> ...
> > > >> > When I go to Msconfig/Advance, and check start up menu, the menu
> > > >> > aappears
> > > >> > but the kb does not response to my choice. What can I do?
> > > >> >
> > > >> > "jim" wrote:
> > > >> >
> > > >> > > ME with ps2/mouse and usb/kb. Upon boot up, both are functioning
> but
> > > >> after a
> > > >> > > while the mouse hang. Any idea what causes these. Since we mouse
> cant
> > > >> move,
> > > >> > > how can I go to see the 'IRQ'. It will work ok upon reboot but
> the
> > > >> problem
> > > >> > > will appear again.(ME besides the usual driver for the graphic
> card,
> > > >> modem,
> > > >> > > it only have the DSL driver install.)Many thanks
> > > >>
> > > >>
> > > >>
> > >
> > >
> > >
>
>
>