PCI bridge just want to check [Archive]

View Full Version : PCI bridge just want to check

grasshopper

November 3rd 04, 09:54 AM

hi,,,,,
I found this in the systems area and wondering if I should be fussed
about it::

---------------------------

' PCI Bridge
Unknown
This Device Has a Problem: Code=28 (0x1C)
The drivers for this device are not installed correctly. To install the
driver
for this device, click the Driver tab, and then click Update Driver.
Registry Key:
HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
DEV_07&FUNC_04
Alloc resources: None
Forced resources: None
Boot resources: None
Filtered resources: None
Basic resources: None
HW Revision: 064
Driver: Driver Not Installed

------------------------------

anyone want to put my mind at ease?

tia
g/h

PA Bear

November 3rd 04, 04:27 PM

What caused you to be looking in "systems area" to discover this?

First Rule of Computing: "If it ain't broke, don't fix it."
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE/OE)

grasshopper wrote:
> hi,,,,,
> I found this in the systems area and wondering if I should be fussed
> about it::
>
> ---------------------------
>
> ' PCI Bridge
> Unknown
> This Device Has a Problem: Code=28 (0x1C)
> The drivers for this device are not installed correctly. To install the
> driver
> for this device, click the Driver tab, and then click Update Driver.
> Registry Key:
> HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
> DEV_07&FUNC_04
> Alloc resources: None
> Forced resources: None
> Boot resources: None
> Filtered resources: None
> Basic resources: None
> HW Revision: 064
> Driver: Driver Not Installed
>
> ------------------------------
>
> anyone want to put my mind at ease?
>
> tia
> g/h

grasshopper

November 3rd 04, 10:09 PM

hi,,,,,,
I am learning dos at college (48yrs old) and i found a command called '
hwinfo /ui ' of which brought up the hardwared info window in win 98.
under ' view ' is an area which shows if there are any problems, and the
afore mentioned showed up.
i went to ' systems ' yesterday as i was just looking around the computer
and the same thing was in there.
hope you can elaborate for me, wont see any college tutor for a week.

g/h

"PA Bear" > wrote in message
...
> What caused you to be looking in "systems area" to discover this?
>
> First Rule of Computing: "If it ain't broke, don't fix it."
> --
> ~Robear Dyer (PA Bear)
> MS MVP-Windows (IE/OE)
>
> grasshopper wrote:
> > hi,,,,,
> > I found this in the systems area and wondering if I should be fussed
> > about it::
> >
> > ---------------------------
> >
> > ' PCI Bridge
> > Unknown
> > This Device Has a Problem: Code=28 (0x1C)
> > The drivers for this device are not installed correctly. To install
the
> > driver
> > for this device, click the Driver tab, and then click Update Driver.
> > Registry Key:
> >
HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
> > DEV_07&FUNC_04
> > Alloc resources: None
> > Forced resources: None
> > Boot resources: None
> > Filtered resources: None
> > Basic resources: None
> > HW Revision: 064
> > Driver: Driver Not Installed
> >
> > ------------------------------
> >
> > anyone want to put my mind at ease?
> >
> > tia
> > g/h
>

PCR

November 3rd 04, 10:51 PM

Wait until Bear goes into an hibernation. Then, I'll come back & fix it
for you.

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"grasshopper" > wrote in message
...
| hi,,,,,
| I found this in the systems area and wondering if I should be fussed
| about it::
|
| ---------------------------
|
| ' PCI Bridge
| Unknown
| This Device Has a Problem: Code=28 (0x1C)
| The drivers for this device are not installed correctly. To
install the
| driver
| for this device, click the Driver tab, and then click Update Driver.
| Registry Key:
|
HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS
_00&
| DEV_07&FUNC_04
| Alloc resources: None
| Forced resources: None
| Boot resources: None
| Filtered resources: None
| Basic resources: None
| HW Revision: 064
| Driver: Driver Not Installed
|
| ------------------------------
|
| anyone want to put my mind at ease?
|
| tia
| g/h
|
|

Hugh Candlin

November 4th 04, 03:48 AM

PA Bear > wrote in message ...
> Done...for "4 more years"!
>
You'd better make it 12. He has a brother....

PA Bear

November 4th 04, 03:50 AM

Done...for "4 more years"!

PCR wrote:
> Wait until Bear goes into an hibernation. Then, I'll come back & fix it
> for you.

glee

November 4th 04, 04:15 AM

"Hugh Candlin" > wrote in message
...
>
> PA Bear > wrote in message
...
> > Done...for "4 more years"!
> >
> You'd better make it 12. He has a brother....
>

Oh! Don't even say it in jest! Now I have to get that picture out of my head!

glee

November 4th 04, 04:17 AM

What processor/chipset is on the motherboard?
Intel or AMD or other processor? VIA or Intel or ALI or other chipset?
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

"grasshopper" > wrote in message
...
> hi,,,,,,
> I am learning dos at college (48yrs old) and i found a command called '
> hwinfo /ui ' of which brought up the hardwared info window in win 98.
> under ' view ' is an area which shows if there are any problems, and the
> afore mentioned showed up.
> i went to ' systems ' yesterday as i was just looking around the computer
> and the same thing was in there.
> hope you can elaborate for me, wont see any college tutor for a week.
>
> g/h
>
>
> "PA Bear" > wrote in message
> ...
> > What caused you to be looking in "systems area" to discover this?
> >
> > First Rule of Computing: "If it ain't broke, don't fix it."
> > --
> > ~Robear Dyer (PA Bear)
> > MS MVP-Windows (IE/OE)
> >
> > grasshopper wrote:
> > > hi,,,,,
> > > I found this in the systems area and wondering if I should be fussed
> > > about it::
> > >
> > > ---------------------------
> > >
> > > ' PCI Bridge
> > > Unknown
> > > This Device Has a Problem: Code=28 (0x1C)
> > > The drivers for this device are not installed correctly. To install
> the
> > > driver
> > > for this device, click the Driver tab, and then click Update Driver.
> > > Registry Key:
> > >
> HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
> > > DEV_07&FUNC_04
> > > Alloc resources: None
> > > Forced resources: None
> > > Boot resources: None
> > > Filtered resources: None
> > > Basic resources: None
> > > HW Revision: 064
> > > Driver: Driver Not Installed
> > >
> > > ------------------------------
> > >
> > > anyone want to put my mind at ease?
> > >
> > > tia
> > > g/h
> >
>
>

grasshopper

November 4th 04, 09:41 AM

> What processor/chipset is on the motherboard?
> Intel or AMD or other processor? VIA or Intel or ALI or other chipset?

tis an AMD 1.33.
g/h

>
> "grasshopper" > wrote in message
> ...
> > hi,,,,,,
> > I am learning dos at college (48yrs old) and i found a command called '
> > hwinfo /ui ' of which brought up the hardwared info window in win 98.
> > under ' view ' is an area which shows if there are any problems, and the
> > afore mentioned showed up.
> > i went to ' systems ' yesterday as i was just looking around the
computer
> > and the same thing was in there.
> > hope you can elaborate for me, wont see any college tutor for a week.
> >
> > g/h
> >
> >
> > "PA Bear" > wrote in message
> > ...
> > > What caused you to be looking in "systems area" to discover this?
> > >
> > > First Rule of Computing: "If it ain't broke, don't fix it."
> > > --
> > > ~Robear Dyer (PA Bear)
> > > MS MVP-Windows (IE/OE)
> > >
> > > grasshopper wrote:
> > > > hi,,,,,
> > > > I found this in the systems area and wondering if I should be fussed
> > > > about it::
> > > >
> > > > ---------------------------
> > > >
> > > > ' PCI Bridge
> > > > Unknown
> > > > This Device Has a Problem: Code=28 (0x1C)
> > > > The drivers for this device are not installed correctly. To
install
> > the
> > > > driver
> > > > for this device, click the Driver tab, and then click Update Driver.
> > > > Registry Key:
> > > >
> >
HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
> > > > DEV_07&FUNC_04
> > > > Alloc resources: None
> > > > Forced resources: None
> > > > Boot resources: None
> > > > Filtered resources: None
> > > > Basic resources: None
> > > > HW Revision: 064
> > > > Driver: Driver Not Installed
> > > >
> > > > ------------------------------
> > > >
> > > > anyone want to put my mind at ease?
> > > >
> > > > tia
> > > > g/h
> > >
> >
> >
>

glee

November 4th 04, 12:23 PM

Try upgrading or reinstalling the VIA 4-in-1 drivers from the VIA web site, if the
system is using a VIA chipset, or reinstall the drivers from the motherboard
installation disc. Modem or sound drivers can also be responsible, and reinstalling
them may help.

What chipset is on the board?
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

"grasshopper" > wrote in message
...
>
> > What processor/chipset is on the motherboard?
> > Intel or AMD or other processor? VIA or Intel or ALI or other chipset?
>
> tis an AMD 1.33.
> g/h
>
>
> >
> > "grasshopper" > wrote in message
> > ...
> > > hi,,,,,,
> > > I am learning dos at college (48yrs old) and i found a command called '
> > > hwinfo /ui ' of which brought up the hardwared info window in win 98.
> > > under ' view ' is an area which shows if there are any problems, and the
> > > afore mentioned showed up.
> > > i went to ' systems ' yesterday as i was just looking around the
> computer
> > > and the same thing was in there.
> > > hope you can elaborate for me, wont see any college tutor for a week.
> > >
> > > g/h
> > >
> > >
> > > "PA Bear" > wrote in message
> > > ...
> > > > What caused you to be looking in "systems area" to discover this?
> > > >
> > > > First Rule of Computing: "If it ain't broke, don't fix it."
> > > > --
> > > > ~Robear Dyer (PA Bear)
> > > > MS MVP-Windows (IE/OE)
> > > >
> > > > grasshopper wrote:
> > > > > hi,,,,,
> > > > > I found this in the systems area and wondering if I should be fussed
> > > > > about it::
> > > > >
> > > > > ---------------------------
> > > > >
> > > > > ' PCI Bridge
> > > > > Unknown
> > > > > This Device Has a Problem: Code=28 (0x1C)
> > > > > The drivers for this device are not installed correctly. To
> install
> > > the
> > > > > driver
> > > > > for this device, click the Driver tab, and then click Update Driver.
> > > > > Registry Key:
> > > > >
> > >
> HKEY_LOCAL_MACHINE\enum\PCI\VEN_1106&DEV_3057&SUBSYS_30571106&REV_40\BUS_00&
> > > > > DEV_07&FUNC_04
> > > > > Alloc resources: None
> > > > > Forced resources: None
> > > > > Boot resources: None
> > > > > Filtered resources: None
> > > > > Basic resources: None
> > > > > HW Revision: 064
> > > > > Driver: Driver Not Installed
> > > > >
> > > > > ------------------------------
> > > > >
> > > > > anyone want to put my mind at ease?
> > > > >
> > > > > tia
> > > > > g/h
> > > >
> > >
> > >
> >
>
>

mae

November 4th 04, 01:43 PM

PCR

November 4th 04, 09:47 PM

Never mind, Glee is fixing it. Uh, wake up, WAKE UP. Did you notice
there's a brand new "critical" for us all...?...

Cumulative Security Update for Internet Explorer 6 Service Pack 1
(KB834707)
Download size: 2.8 MB, 9 minutes
A security issue has been identified that could allow an attacker to
compromise a computer running Internet Explorer and gain control over
it. You can help protect your computer by installing this update from
Microsoft. After you install this item, you may have to restart your
computer. Read more...

It came in well for me!

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"PA Bear" > wrote in message
...
| Done...for "4 more years"!
|
| PCR wrote:
| > Wait until Bear goes into an hibernation. Then, I'll come back & fix
it
| > for you.

PCR

November 4th 04, 10:08 PM

TWO brothers & A cousin.

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"glee" > wrote in message
...
| "Hugh Candlin" > wrote in message
| ...
| >
| > PA Bear > wrote in message
| ...
| > > Done...for "4 more years"!
| > >
| > You'd better make it 12. He has a brother....
| >
|
| Oh! Don't even say it in jest! Now I have to get that picture out of
my head!
|

PCR

November 4th 04, 10:10 PM

Right, two & a cousin. Hey? How'd you know that, mae?

--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"mae" > wrote in message
...
Oh my, horror of horrors .....I thought Halloween was over. He has 2
brothers.

--
mae

"Hugh Candlin" > wrote in message
...
|
| PA Bear > wrote in message
...
| > Done...for "4 more years"!
| >
| You'd better make it 12. He has a brother....
|

mae

November 4th 04, 10:27 PM

PCR

November 4th 04, 11:03 PM

grasshopper

November 5th 04, 06:42 AM

"glee" > wrote in message
...
> Try upgrading or reinstalling the VIA 4-in-1 drivers from the VIA web
site, if the
> system is using a VIA chipset, or reinstall the drivers from the
motherboard
> installation disc. Modem or sound drivers can also be responsible, and
reinstalling
> them may help.
>
> What chipset is on the board?
> --
> Glen Ventura, MS MVP W95/98 Systems
> http://dts-l.org/goodpost.htm
>

thanks for replies Glen........
I got a feeling i found the problem, i have no printer installed and its
definately under that heading.
another thing tho', i looked in as many places as i could think of to
find out what chipset i have, but i couldnt find it; where does one
go to see?
i've been all over the systems area, opened just about everything in control
panel, plus a few other places i didnt know existed.

g/h

glee

November 5th 04, 12:12 PM

Run either or both of these utilities to find your chipset and all kinds of other
info about your system:

AIDA, and Everest:
http://aumha.org/freeware/freeware.php#everest
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

"grasshopper" > wrote in message
...
>
> "glee" > wrote in message
> ...
> > Try upgrading or reinstalling the VIA 4-in-1 drivers from the VIA web
> site, if the
> > system is using a VIA chipset, or reinstall the drivers from the
> motherboard
> > installation disc. Modem or sound drivers can also be responsible, and
> reinstalling
> > them may help.
> >
> > What chipset is on the board?
> > --
> > Glen Ventura, MS MVP W95/98 Systems
> > http://dts-l.org/goodpost.htm
> >
>
> thanks for replies Glen........
> I got a feeling i found the problem, i have no printer installed and its
> definately under that heading.
> another thing tho', i looked in as many places as i could think of to
> find out what chipset i have, but i couldnt find it; where does one
> go to see?
> i've been all over the systems area, opened just about everything in control
> panel, plus a few other places i didnt know existed.
>
> g/h
>
>

grasshopper

November 6th 04, 04:11 AM

"glee" > wrote in message
...
> Run either or both of these utilities to find your chipset and all kinds
of other
> info about your system:
>
> AIDA, and Everest:
> http://aumha.org/freeware/freeware.php#everest
> --
> Glen Ventura, MS MVP W95/98 Systems
> http://dts-l.org/goodpost.htm

Excellent, thanks for the link.
I have a lot of spy stuff (adaware, cwshredder, sysmechanic, spybot etc) but
there is some really good stuff there.
am grabbing everest, IEspy & few others at the moment.
should be able to get my chipset back to you soon.
One other thing; i'm running 98 and there is no ' system restore point '
option (or that i have found yet), is there a utility out there that i can
use?

tia
g/h

grasshopper

November 6th 04, 04:16 AM

two more things:::::::::

1)i couldnt find AIDA, did i miss something?

2)will the IEspyad work with other browsers? I use Mozilla

thanks again...

g/h

glee

November 6th 04, 12:07 PM

"grasshopper" > wrote in message
...
> two more things:::::::::
>
> 1)i couldnt find AIDA, did i miss something?

Apparently. The link I posted:
http://aumha.org/freeware/freeware.php#everest
takes you to the section about Everest, and directly below that it says "Another
Great System Information Tool...", with a link to AIDA32 ver. 3.93
http://aumha.org/downloads/aida32.zip
along with its users' guide:
http://aumha.org/downloads/aida32_guide.zip

>
> 2)will the IEspyad work with other browsers? I use Mozilla

No. From the program's web site:
"...works only with Internet Explorer; it will have no effect whatsoever on Opera,
Mozilla, Netscape 6.0/7.0, or the older Netscape Navigator/Communicator."
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

glee

November 6th 04, 12:10 PM

No Restore Points in Win98. I suggest using a third-party imaging tool to make
images of your partitions to CD-R (if you have a CD-RW drive).

Image for Windows:
http://www.terabyteunlimited.com/imagew.html

Image for DOS:
http://www.terabyteunlimited.com/image.html

Symantec's Norton Ghost will also make images for you, at twice the cost.
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

"grasshopper" > wrote in message
...
>
> "glee" > wrote in message
> ...
> > Run either or both of these utilities to find your chipset and all kinds
> of other
> > info about your system:
> >
> > AIDA, and Everest:
> > http://aumha.org/freeware/freeware.php#everest
> > --
> > Glen Ventura, MS MVP W95/98 Systems
> > http://dts-l.org/goodpost.htm
>
>
> Excellent, thanks for the link.
> I have a lot of spy stuff (adaware, cwshredder, sysmechanic, spybot etc) but
> there is some really good stuff there.
> am grabbing everest, IEspy & few others at the moment.
> should be able to get my chipset back to you soon.
> One other thing; i'm running 98 and there is no ' system restore point '
> option (or that i have found yet), is there a utility out there that i can
> use?
>
> tia
> g/h
>
>