HP Scanjet 5p w/Windows 98SE

[JAR]

I just connected my HP scanjet to my windows 98 pc. The
SCSI card I have is Symbios Logic 50403. I have been
trying to find drivers for this card to work w/Win 98SE
but they wont work. Where can I find them and when I do
find them and unzip them, do I need to place them in a
certain Windows folder? Please assist. THANKS.

[C]

Hi JAR,
Try here.
http://www.driverguide.com/

^You might find it here.^

C
For information on installing W98, go to:
http://home.satx.rr.com/badour/html/w98_restore.html
or go to:
http://www.waynescomputerworld.com/cleaninstall.html
^ Also tells you how to Formate/Reformate your Hard Drive
for Reintallation(s.)^ < Or upgrades.

But if you DON'T have a boot disk go to: www.bootdisk.com

Need a NEW Hard Drive or NEW computer Parts or Computer
stuff.GO TO:
http://www.tigerdirect.com/

Looking for your Driver name or file &/or software GO
TO: http://www.driverguide.com/

Still don't know the name or manufcturer of your
driver.On your driver, look for a sticker
with an FCC ID number. Then go to this site to determine
the manufacturer of your card.
http://www.fcc.gov/oet/fccid/help.html#drivers

Are you looking for RAM memory for your PC. GO TO:
www.crucial.com

Have a good day.

C

>-----JAR said,-----
>I just connected my HP scanjet to my windows 98 pc. The
>SCSI card I have is Symbios Logic 50403. I have been
>trying to find drivers for this card to work w/Win 98SE
>but they wont work. Where can I find them and when I do
>find them and unzip them, do I need to place them in a
>certain Windows folder? Please assist. THANKS.
>.
>

[Lil' Dave]

Look around for an Adaptec 2910 SCSI card, more prevalent, more advice,
easier to install. Careful shopping, its a scsi 1 or 2 card, 50 pin
external interface. Windows has drivers for it natively. Another solution
is a 2930CU that has asset for both internal ultrascsi, and external scsi,
all 50 pin versions. Windows 9X/ME has no driver for this, available at
Adaptec website.
"JAR" > wrote in message
...
> I just connected my HP scanjet to my windows 98 pc. The
> SCSI card I have is Symbios Logic 50403. I have been
> trying to find drivers for this card to work w/Win 98SE
> but they wont work. Where can I find them and when I do
> find them and unzip them, do I need to place them in a
> certain Windows folder? Please assist. THANKS.