PDA

View Full Version : fustrated


andy
June 8th 04, 01:28 AM
Could somebody tell me how to change the screen
resalution with out seeing what you are doing the auto
screen res is wrong for both my monitors and i just need
blind directions i.e press start go up 2 press enter
etc... i need it to be in 640 x 480

Papa
June 8th 04, 01:39 AM
I don't know what you mean by "with out seeing what you are doing", but to
change your monitor resolution just open the Control Panel, click on
Display, then click on Settings. After that, select whatever resolution you
desire, but select one that your monitor can handle.

"andy" > wrote in message
...
> Could somebody tell me how to change the screen
> resalution with out seeing what you are doing the auto
> screen res is wrong for both my monitors and i just need
> blind directions i.e press start go up 2 press enter
> etc... i need it to be in 640 x 480
>

Ben Myers
June 8th 04, 01:44 AM
Try setting it in Safe mode(tap the F8 key during bootup).

Ben

"andy" > wrote in message =
...
> Could somebody tell me how to change the screen=20
> resalution with out seeing what you are doing the auto=20
> screen res is wrong for both my monitors and i just need=20
> blind directions i.e press start go up 2 press enter=20
> etc... i need it to be in 640 x 480
>

Hugh Candlin
June 8th 04, 06:12 AM
andy > wrote in message ...
> Could somebody tell me how to change the screen
> resalution with out seeing what you are doing the auto
> screen res is wrong for both my monitors and i just need
> blind directions i.e press start go up 2 press enter
> etc... i need it to be in 640 x 480

Try this

Right-click on the Desktop
Press the R key
Hold down the CTRL key and press TAB 5 times
Press the HOME key
Press the Enter key

Big Mac
June 9th 04, 12:52 AM
>andy > wrote in message ...
>> Could somebody tell me how to change the screen
>> resalution with out seeing what you are doing the auto
>> screen res is wrong for both my monitors and i just need
>> blind directions i.e press start go up 2 press enter
>> etc... i need it to be in 640 x 480

On Mon, 7 Jun 2004 22:12:01 -0700, "Hugh Candlin" > wrote:
>Try this
>Right-click on the Desktop
>Press the R key
>Hold down the CTRL key and press TAB 5 times
>Press the HOME key
>Press the Enter key

WTF is this? I am new to Windows 98 (a second computer on a little
wireless home network) & normally use Win XP.. That is the weirdest
thing I have ever heard.

Andy, press "start". Choose "Control panel". Choose "display" (I
think), In there, with one of the selections you'll see a moveable
sliding button. If you move it, it will tell you what display you are
selecting. Then "apply" after you get 640 x 480.

But why can't you run 800 x 600 ? That is at the low end of easy
Internet settings to see web pages & other stuff without having to
move a sliding button everywhere to see everything.

Big Mac

Gary S. Terhune
June 9th 04, 02:17 AM
OP can't use your instructions, or any other standard instructions because
OP can't *see* anything, capiche?

Unfortunately, it appears that OP also has a dual-monitor adapter, and
probably also has manufacturer's display management tools installed, which
makes guessing at the precise set of keystrokes a shot in the dark. For
instance, on my XP with Radeon 8500 dual-monitor adapter and ATI management,
Hugh's keystrokes are meaningless.

Safe Mode suggestion was probably best. I'd even go so far as to switch to
Standard VGA adapter in Safe Mode, uninstall the support software, then
restart and finally reinstall the proper drivers, etc.

--
Gary S. Terhune
MS MVP for Win9x

"Big Mac" > wrote in message
...
> >andy > wrote in message
...
> >> Could somebody tell me how to change the screen
> >> resalution with out seeing what you are doing the auto
> >> screen res is wrong for both my monitors and i just need
> >> blind directions i.e press start go up 2 press enter
> >> etc... i need it to be in 640 x 480
>
> On Mon, 7 Jun 2004 22:12:01 -0700, "Hugh Candlin" > wrote:
> >Try this
> >Right-click on the Desktop
> >Press the R key
> >Hold down the CTRL key and press TAB 5 times
> >Press the HOME key
> >Press the Enter key
>
> WTF is this? I am new to Windows 98 (a second computer on a little
> wireless home network) & normally use Win XP.. That is the weirdest
> thing I have ever heard.
>
> Andy, press "start". Choose "Control panel". Choose "display" (I
> think), In there, with one of the selections you'll see a moveable
> sliding button. If you move it, it will tell you what display you are
> selecting. Then "apply" after you get 640 x 480.
>
> But why can't you run 800 x 600 ? That is at the low end of easy
> Internet settings to see web pages & other stuff without having to
> move a sliding button everywhere to see everything.
>
> Big Mac

Papa
June 9th 04, 04:13 AM
Sorry for my useless response. I did not realize the true situation until
Gary spelled it out.

"Papa" > wrote in message
...
> I don't know what you mean by "with out seeing what you are doing", but to
> change your monitor resolution just open the Control Panel, click on
> Display, then click on Settings. After that, select whatever resolution
you
> desire, but select one that your monitor can handle.
>
> "andy" > wrote in message
> ...
> > Could somebody tell me how to change the screen
> > resalution with out seeing what you are doing the auto
> > screen res is wrong for both my monitors and i just need
> > blind directions i.e press start go up 2 press enter
> > etc... i need it to be in 640 x 480
> >
>
>

Hugh Candlin
June 9th 04, 06:17 AM
Big Mac > wrote in message ...
> >andy > wrote in message ...
> >> Could somebody tell me how to change the screen
> >> resalution with out seeing what you are doing the auto
> >> screen res is wrong for both my monitors and i just need
> >> blind directions i.e press start go up 2 press enter
> >> etc... i need it to be in 640 x 480
>
> On Mon, 7 Jun 2004 22:12:01 -0700, "Hugh Candlin" > wrote:
> >Try this
> >Right-click on the Desktop
> >Press the R key
> >Hold down the CTRL key and press TAB 5 times
> >Press the HOME key
> >Press the Enter key
>
> WTF is this?

Instructions for working "with out seeing what you are doing".

> I am new to Windows 98 (a second computer on a little
> wireless home network) & normally use Win XP.. That is the weirdest
> thing I have ever heard.

Perhaps because you don't understand the issue.

One bit of advice. If a regular poster posts advice which seems
"off the wall", go back and study the original problem
one more time before you criticize the solution.

While there is always a chance that the posted solution could be wrong,
the likelihood is that you are wrong, especially if you don't know the OS,
and the respondent does, and has probably seen this problem before.

Which I have, and replied to before, and resolved. Take care.

Big Mac
June 10th 04, 12:49 AM
Yes. you are correct. I did not understand the issue. I know now
that he cannot see a darn thing and needs to know exact keystrokes to
do what he needs to do.

OK, Andy. In case you missed the post to boot into safe mode, I'll
repeat it.

Just press F-8 a couple of times a second as Win 98 is loading. You
should get a DOS looking screen early in the boot process. Your mouse
will not work. Press the number of "safe mode" (#3 I think) or use
your up/down arrow keys on the keyboard to highlight "safe mode".
Then press enter. Your computer will now boot into safe mode. Safe
mode bypasses your configs you set. It will boot to 640 x 480. So
now you should be OK. But you need to change your display permanently
to 640 x 480 now for the next time you boot (it will boot back into
normal mode unless you do the F-8 thing again). So while you are in
safe mode & before you reboot, start\control panel\display -
somewhere in there is a sliding bar/button thingy. If you move it, it
will say what mode. It should jump to 640 x 480 when you move it to
the right place. Then "apply" then "OK". (I think there is apply in
Win 98 - if not, just "OK". Then reboot, & hopefully it will load up
normally in 640 x 480. Hopefully you have the correct driver
installed. Hopefully to all. new to Win 98. second computer on a
little home network.


>Big Mac > wrote in message ...
>> >andy > wrote in message ...
>> >> Could somebody tell me how to change the screen
>> >> resalution with out seeing what you are doing the auto
>> >> screen res is wrong for both my monitors and i just need
>> >> blind directions i.e press start go up 2 press enter
>> >> etc... i need it to be in 640 x 480
>>
>> On Mon, 7 Jun 2004 22:12:01 -0700, "Hugh Candlin" > wrote:
>> >Try this
>> >Right-click on the Desktop
>> >Press the R key
>> >Hold down the CTRL key and press TAB 5 times
>> >Press the HOME key
>> >Press the Enter key
>>
>> WTF is this?
>
On Tue, 8 Jun 2004 22:17:39 -0700, "Hugh Candlin" > wrote:
>Instructions for working "with out seeing what you are doing".
>
>> I am new to Windows 98 (a second computer on a little
>> wireless home network) & normally use Win XP.. That is the weirdest
>> thing I have ever heard.
>
>Perhaps because you don't understand the issue.
>
>One bit of advice. If a regular poster posts advice which seems
>"off the wall", go back and study the original problem
>one more time before you criticize the solution.
>
>While there is always a chance that the posted solution could be wrong,
>the likelihood is that you are wrong, especially if you don't know the OS,
>and the respondent does, and has probably seen this problem before.
>
>Which I have, and replied to before, and resolved. Take care.
>