Bernard R Buchta
September 7th 04, 06:22 AM
Compaq 7595 running Win98(SE)
BIOS Reports: Pentium III 650/100 & 128 MEG of RAM.
-----------
System Properties shows:
Chip: X86 Family 6 Model 8 Stepping 1, with 128 MEG of RAM
Running Win98(SE) 4.10.222A.
OEM 25203-OEM-0077077-74010.
Windows shows 2 hard drives -- C:\ and D:\ -- (probably Partitioned)
C:\Drive is 25 GIG with 9 GIG used.
D:\Drive is 2.7 GIG with 1.1 GIG used.
Machine has a CD-Burner and a DVD Player.
Device Manager shows: E:\Drive, CD-RW ATAPI CD-RW 52x24
Device Manager shows: F:\Drive, DVD-ROM - Compaq DVD-ROM 5D608
---------
THE PROBLEM is the system DOES NOT DETECT ANY of 4 Flash Drives, and I =
CAN'T INSTALL THE DRIVERS into it.
When I put any of the 4 Flash Drives into any USB port, nothing happens.
Then I go: Control Panel > Add New Hardware and the system finds a new =
device.
However, when I "browse" to the folders with the Flash .INF files and/or
the other Set-up files, the operating system FAILS to install the =
drivers.
It leaves a big "yellow question mark" in the Device Manager.
I'm trying to install and HAVE ALL the drivers on CD-ROM for these Flash =
drives.
1. PNY Attache 64 MEG Flash Disc
2. PNY Attache 128 MEG Flash Disc USB 2.0=20
3. SanDisk Cruzer mini 128 MEG=20
4. AVB 64 MEG=20
----------------
I went to the Compaq site and went through their Troubleshooting =
recommendations for my machine. The best suggestion I received was to =
check the BIOS to see of Advanced setting for the Legacy Plug and Play =
support was enabled. It was.
----------------
I've installed these same Devices and Drivers in many other Win98(SE) =
machines.
I've installed them in many family and friends Win98(SE) machines, and =
had no problems. =20
I've install them in many different Win98(SE) machines in three =
different classrooms, and had no problems.
It's only in this Compaq 7595 with DVD Player that I'm experiencing =
problems.
Does anyone have any recommendations/suggestions as what to pursue next? =
Many thanks, in Advance.
Bernie in Troy, MI
BIOS Reports: Pentium III 650/100 & 128 MEG of RAM.
-----------
System Properties shows:
Chip: X86 Family 6 Model 8 Stepping 1, with 128 MEG of RAM
Running Win98(SE) 4.10.222A.
OEM 25203-OEM-0077077-74010.
Windows shows 2 hard drives -- C:\ and D:\ -- (probably Partitioned)
C:\Drive is 25 GIG with 9 GIG used.
D:\Drive is 2.7 GIG with 1.1 GIG used.
Machine has a CD-Burner and a DVD Player.
Device Manager shows: E:\Drive, CD-RW ATAPI CD-RW 52x24
Device Manager shows: F:\Drive, DVD-ROM - Compaq DVD-ROM 5D608
---------
THE PROBLEM is the system DOES NOT DETECT ANY of 4 Flash Drives, and I =
CAN'T INSTALL THE DRIVERS into it.
When I put any of the 4 Flash Drives into any USB port, nothing happens.
Then I go: Control Panel > Add New Hardware and the system finds a new =
device.
However, when I "browse" to the folders with the Flash .INF files and/or
the other Set-up files, the operating system FAILS to install the =
drivers.
It leaves a big "yellow question mark" in the Device Manager.
I'm trying to install and HAVE ALL the drivers on CD-ROM for these Flash =
drives.
1. PNY Attache 64 MEG Flash Disc
2. PNY Attache 128 MEG Flash Disc USB 2.0=20
3. SanDisk Cruzer mini 128 MEG=20
4. AVB 64 MEG=20
----------------
I went to the Compaq site and went through their Troubleshooting =
recommendations for my machine. The best suggestion I received was to =
check the BIOS to see of Advanced setting for the Legacy Plug and Play =
support was enabled. It was.
----------------
I've installed these same Devices and Drivers in many other Win98(SE) =
machines.
I've installed them in many family and friends Win98(SE) machines, and =
had no problems. =20
I've install them in many different Win98(SE) machines in three =
different classrooms, and had no problems.
It's only in this Compaq 7595 with DVD Player that I'm experiencing =
problems.
Does anyone have any recommendations/suggestions as what to pursue next? =
Many thanks, in Advance.
Bernie in Troy, MI